Dmitry Maylarov
7 years ago
commit
7075299ff5
@ -0,0 +1,3 @@
|
|||||||
|
Drivers/*
|
||||||
|
Middlewares/*
|
||||||
|
build/*
|
||||||
@ -0,0 +1,37 @@
|
|||||||
|
[PreviousGenFiles]
|
||||||
|
AdvancedFolderStructure=true
|
||||||
|
HeaderFileListSize=7
|
||||||
|
HeaderFiles#0=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/App/usb_device.h
|
||||||
|
HeaderFiles#1=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/Target/usbd_conf.h
|
||||||
|
HeaderFiles#2=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/App/usbd_desc.h
|
||||||
|
HeaderFiles#3=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/App/usbd_cdc_if.h
|
||||||
|
HeaderFiles#4=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Inc/stm32f1xx_it.h
|
||||||
|
HeaderFiles#5=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Inc/stm32f1xx_hal_conf.h
|
||||||
|
HeaderFiles#6=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Inc/main.h
|
||||||
|
HeaderFolderListSize=3
|
||||||
|
HeaderPath#0=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/App
|
||||||
|
HeaderPath#1=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/Target
|
||||||
|
HeaderPath#2=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Inc
|
||||||
|
HeaderFiles=;
|
||||||
|
SourceFileListSize=7
|
||||||
|
SourceFiles#0=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/App/usb_device.c
|
||||||
|
SourceFiles#1=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/Target/usbd_conf.c
|
||||||
|
SourceFiles#2=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/App/usbd_desc.c
|
||||||
|
SourceFiles#3=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/App/usbd_cdc_if.c
|
||||||
|
SourceFiles#4=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Src/stm32f1xx_it.c
|
||||||
|
SourceFiles#5=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Src/stm32f1xx_hal_msp.c
|
||||||
|
SourceFiles#6=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Src/main.c
|
||||||
|
SourceFolderListSize=3
|
||||||
|
SourcePath#0=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/App
|
||||||
|
SourcePath#1=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/Target
|
||||||
|
SourcePath#2=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Src
|
||||||
|
SourceFiles=;
|
||||||
|
|
||||||
|
[PreviousLibFiles]
|
||||||
|
LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2c.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2c.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;
|
||||||
|
|
||||||
|
[PreviousUsedMakefileFiles]
|
||||||
|
SourceFiles=Core\Src\main.c;USB_DEVICE\App\usb_device.c;USB_DEVICE\Target\usbd_conf.c;USB_DEVICE\App\usbd_desc.c;USB_DEVICE\App\usbd_cdc_if.c;Core\Src\stm32f1xx_it.c;Core\Src\stm32f1xx_hal_msp.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Core\Src/system_stm32f1xx.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Core\Src/system_stm32f1xx.c;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;null;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c;
|
||||||
|
HeaderPath=Drivers\STM32F1xx_HAL_Driver\Inc;Drivers\STM32F1xx_HAL_Driver\Inc\Legacy;Middlewares\ST\STM32_USB_Device_Library\Core\Inc;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Inc;Drivers\CMSIS\Device\ST\STM32F1xx\Include;Drivers\CMSIS\Include;USB_DEVICE\App;USB_DEVICE\Target;Core\Inc;
|
||||||
|
CDefines=USE_HAL_DRIVER;STM32F103xB;USE_HAL_DRIVER;STM32F103xB;
|
||||||
|
|
||||||
@ -0,0 +1 @@
|
|||||||
|
[]
|
||||||
@ -0,0 +1 @@
|
|||||||
|
[]
|
||||||
@ -0,0 +1,23 @@
|
|||||||
|
{
|
||||||
|
"configurations": [
|
||||||
|
{
|
||||||
|
"name": "Win",
|
||||||
|
"includePath": [
|
||||||
|
"${workspaceFolder}/**",
|
||||||
|
"C:/GNU MCU Eclipse/ARM Embedded GCC/**"
|
||||||
|
],
|
||||||
|
"defines": [
|
||||||
|
"_DEBUG",
|
||||||
|
"UNICODE",
|
||||||
|
"_UNICODE",
|
||||||
|
"USE_HAL_DRIVER",
|
||||||
|
"STM32F103xB"
|
||||||
|
],
|
||||||
|
"cStandard": "c11",
|
||||||
|
"cppStandard": "c++17",
|
||||||
|
"intelliSenseMode": "gcc-x64",
|
||||||
|
"compilerPath": "C:/GNU MCU Eclipse/ARM Embedded GCC/bin/arm-none-eabi-gcc.exe"
|
||||||
|
}
|
||||||
|
],
|
||||||
|
"version": 4
|
||||||
|
}
|
||||||
@ -0,0 +1,32 @@
|
|||||||
|
{
|
||||||
|
"version": "0.2.0",
|
||||||
|
"configurations": [
|
||||||
|
{
|
||||||
|
"name": "openocd",
|
||||||
|
"request": "launch",
|
||||||
|
"type": "cortex-debug",
|
||||||
|
"cwd": "${workspaceRoot}",
|
||||||
|
"servertype": "openocd",
|
||||||
|
"executable": "build/uberdevice.elf",
|
||||||
|
"svdFile": "target/STM32F103xx.svd",
|
||||||
|
"configFiles": [
|
||||||
|
"target/stlink.cfg",
|
||||||
|
"target/stm32f1x.cfg"
|
||||||
|
],
|
||||||
|
"swoConfig": {
|
||||||
|
"source": "probe",
|
||||||
|
"enabled": true,
|
||||||
|
"swoFrequency": 4000000,
|
||||||
|
"cpuFrequency": 48000000,
|
||||||
|
"decoders": [
|
||||||
|
{
|
||||||
|
"port": 0,
|
||||||
|
"label": "Output",
|
||||||
|
"type": "console",
|
||||||
|
"encoding":"ascii"
|
||||||
|
}
|
||||||
|
]
|
||||||
|
}
|
||||||
|
}
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,4 @@
|
|||||||
|
{
|
||||||
|
"cortex-debug.armToolchainPath": "C:/GNU MCU Eclipse/ARM Embedded GCC/bin/",
|
||||||
|
"cortex-debug.openocdPath": "C:/GNU MCU Eclipse/OpenOCD/bin/openocd.exe"
|
||||||
|
}
|
||||||
@ -0,0 +1,64 @@
|
|||||||
|
{
|
||||||
|
"version": "2.0.0",
|
||||||
|
"tasks": [
|
||||||
|
{
|
||||||
|
"label": "Make Build",
|
||||||
|
"type": "shell",
|
||||||
|
"command": "make -s -j 10 all",
|
||||||
|
"options": {
|
||||||
|
"cwd": "${workspaceRoot}",
|
||||||
|
"shell": {
|
||||||
|
"executable": "cmd.exe",
|
||||||
|
"args": [
|
||||||
|
"/C"
|
||||||
|
]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"group": {
|
||||||
|
"kind": "build",
|
||||||
|
"isDefault": true
|
||||||
|
},
|
||||||
|
"problemMatcher": [
|
||||||
|
"$gcc"
|
||||||
|
]
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"label": "Make Clean",
|
||||||
|
"type": "shell",
|
||||||
|
"command": "make -s clean",
|
||||||
|
"options": {
|
||||||
|
"cwd": "${workspaceRoot}",
|
||||||
|
"shell": {
|
||||||
|
"executable": "cmd.exe",
|
||||||
|
"args": [
|
||||||
|
"/C"
|
||||||
|
]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"group": {
|
||||||
|
"kind": "build",
|
||||||
|
"isDefault": true
|
||||||
|
},
|
||||||
|
"problemMatcher": []
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"label": "Debug",
|
||||||
|
"type": "shell",
|
||||||
|
"command": "make -s clean",
|
||||||
|
"options": {
|
||||||
|
"cwd": "${workspaceRoot}",
|
||||||
|
"shell": {
|
||||||
|
"executable": "cmd.exe",
|
||||||
|
"args": [
|
||||||
|
"/C"
|
||||||
|
]
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"group": {
|
||||||
|
"kind": "build",
|
||||||
|
"isDefault": true
|
||||||
|
},
|
||||||
|
"problemMatcher": []
|
||||||
|
}
|
||||||
|
]
|
||||||
|
}
|
||||||
@ -0,0 +1,87 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : main.h
|
||||||
|
* @brief : Header for main.c file.
|
||||||
|
* This file contains the common defines of the application.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __MAIN_H
|
||||||
|
#define __MAIN_H
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "stm32f1xx_hal.h"
|
||||||
|
|
||||||
|
/* Private includes ----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* Exported types ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN ET */
|
||||||
|
|
||||||
|
/* USER CODE END ET */
|
||||||
|
|
||||||
|
/* Exported constants --------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN EC */
|
||||||
|
|
||||||
|
/* USER CODE END EC */
|
||||||
|
|
||||||
|
/* Exported macro ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN EM */
|
||||||
|
|
||||||
|
/* USER CODE END EM */
|
||||||
|
|
||||||
|
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
|
||||||
|
|
||||||
|
/* Exported functions prototypes ---------------------------------------------*/
|
||||||
|
void Error_Handler(void);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EFP */
|
||||||
|
|
||||||
|
/* USER CODE END EFP */
|
||||||
|
|
||||||
|
/* Private defines -----------------------------------------------------------*/
|
||||||
|
#define LED2_Pin GPIO_PIN_0
|
||||||
|
#define LED2_GPIO_Port GPIOA
|
||||||
|
#define SPK1_Pin GPIO_PIN_1
|
||||||
|
#define SPK1_GPIO_Port GPIOA
|
||||||
|
#define BigButton_Pin GPIO_PIN_2
|
||||||
|
#define BigButton_GPIO_Port GPIOA
|
||||||
|
#define LED1_Pin GPIO_PIN_3
|
||||||
|
#define LED1_GPIO_Port GPIOA
|
||||||
|
#define SPK2_Pin GPIO_PIN_7
|
||||||
|
#define SPK2_GPIO_Port GPIOA
|
||||||
|
#define MinusButton_Pin GPIO_PIN_12
|
||||||
|
#define MinusButton_GPIO_Port GPIOB
|
||||||
|
#define PlusButton_Pin GPIO_PIN_15
|
||||||
|
#define PlusButton_GPIO_Port GPIOB
|
||||||
|
/* USER CODE BEGIN Private defines */
|
||||||
|
|
||||||
|
/* USER CODE END Private defines */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __MAIN_H */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,370 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file stm32f1xx_hal_conf.h
|
||||||
|
* @brief HAL configuration file.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without modification,
|
||||||
|
* are permitted provided that the following conditions are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer in the documentation
|
||||||
|
* and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __STM32F1xx_HAL_CONF_H
|
||||||
|
#define __STM32F1xx_HAL_CONF_H
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Exported types ------------------------------------------------------------*/
|
||||||
|
/* Exported constants --------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* ########################## Module Selection ############################## */
|
||||||
|
/**
|
||||||
|
* @brief This is the list of modules to be used in the HAL driver
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define HAL_MODULE_ENABLED
|
||||||
|
/*#define HAL_ADC_MODULE_ENABLED */
|
||||||
|
/*#define HAL_CRYP_MODULE_ENABLED */
|
||||||
|
/*#define HAL_CAN_MODULE_ENABLED */
|
||||||
|
/*#define HAL_CEC_MODULE_ENABLED */
|
||||||
|
/*#define HAL_CORTEX_MODULE_ENABLED */
|
||||||
|
/*#define HAL_CRC_MODULE_ENABLED */
|
||||||
|
/*#define HAL_DAC_MODULE_ENABLED */
|
||||||
|
#define HAL_DMA_MODULE_ENABLED
|
||||||
|
/*#define HAL_ETH_MODULE_ENABLED */
|
||||||
|
/*#define HAL_FLASH_MODULE_ENABLED */
|
||||||
|
#define HAL_GPIO_MODULE_ENABLED
|
||||||
|
#define HAL_I2C_MODULE_ENABLED
|
||||||
|
/*#define HAL_I2S_MODULE_ENABLED */
|
||||||
|
/*#define HAL_IRDA_MODULE_ENABLED */
|
||||||
|
/*#define HAL_IWDG_MODULE_ENABLED */
|
||||||
|
/*#define HAL_NOR_MODULE_ENABLED */
|
||||||
|
/*#define HAL_NAND_MODULE_ENABLED */
|
||||||
|
/*#define HAL_PCCARD_MODULE_ENABLED */
|
||||||
|
#define HAL_PCD_MODULE_ENABLED
|
||||||
|
/*#define HAL_HCD_MODULE_ENABLED */
|
||||||
|
/*#define HAL_PWR_MODULE_ENABLED */
|
||||||
|
/*#define HAL_RCC_MODULE_ENABLED */
|
||||||
|
/*#define HAL_RTC_MODULE_ENABLED */
|
||||||
|
/*#define HAL_SD_MODULE_ENABLED */
|
||||||
|
/*#define HAL_MMC_MODULE_ENABLED */
|
||||||
|
/*#define HAL_SDRAM_MODULE_ENABLED */
|
||||||
|
/*#define HAL_SMARTCARD_MODULE_ENABLED */
|
||||||
|
/*#define HAL_SPI_MODULE_ENABLED */
|
||||||
|
/*#define HAL_SRAM_MODULE_ENABLED */
|
||||||
|
#define HAL_TIM_MODULE_ENABLED
|
||||||
|
#define HAL_UART_MODULE_ENABLED
|
||||||
|
/*#define HAL_USART_MODULE_ENABLED */
|
||||||
|
/*#define HAL_WWDG_MODULE_ENABLED */
|
||||||
|
/*#define HAL_EXTI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#define HAL_CORTEX_MODULE_ENABLED
|
||||||
|
#define HAL_DMA_MODULE_ENABLED
|
||||||
|
#define HAL_FLASH_MODULE_ENABLED
|
||||||
|
#define HAL_GPIO_MODULE_ENABLED
|
||||||
|
#define HAL_PWR_MODULE_ENABLED
|
||||||
|
#define HAL_RCC_MODULE_ENABLED
|
||||||
|
|
||||||
|
/* ########################## Oscillator Values adaptation ####################*/
|
||||||
|
/**
|
||||||
|
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||||
|
* This value is used by the RCC HAL module to compute the system frequency
|
||||||
|
* (when HSE is used as system clock source, directly or through the PLL).
|
||||||
|
*/
|
||||||
|
#if !defined (HSE_VALUE)
|
||||||
|
#define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
|
||||||
|
#endif /* HSE_VALUE */
|
||||||
|
|
||||||
|
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||||
|
#define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */
|
||||||
|
#endif /* HSE_STARTUP_TIMEOUT */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Internal High Speed oscillator (HSI) value.
|
||||||
|
* This value is used by the RCC HAL module to compute the system frequency
|
||||||
|
* (when HSI is used as system clock source, directly or through the PLL).
|
||||||
|
*/
|
||||||
|
#if !defined (HSI_VALUE)
|
||||||
|
#define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
|
||||||
|
#endif /* HSI_VALUE */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Internal Low Speed oscillator (LSI) value.
|
||||||
|
*/
|
||||||
|
#if !defined (LSI_VALUE)
|
||||||
|
#define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */
|
||||||
|
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||||
|
The real value may vary depending on the variations
|
||||||
|
in voltage and temperature. */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief External Low Speed oscillator (LSE) value.
|
||||||
|
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||||
|
*/
|
||||||
|
#if !defined (LSE_VALUE)
|
||||||
|
#define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
|
||||||
|
#endif /* LSE_VALUE */
|
||||||
|
|
||||||
|
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||||
|
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */
|
||||||
|
#endif /* LSE_STARTUP_TIMEOUT */
|
||||||
|
|
||||||
|
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||||
|
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||||
|
|
||||||
|
/* ########################### System Configuration ######################### */
|
||||||
|
/**
|
||||||
|
* @brief This is the HAL system configuration section
|
||||||
|
*/
|
||||||
|
#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
|
||||||
|
#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority (lowest by default) */
|
||||||
|
#define USE_RTOS 0
|
||||||
|
#define PREFETCH_ENABLE 1
|
||||||
|
|
||||||
|
/* ########################## Assert Selection ############################## */
|
||||||
|
/**
|
||||||
|
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||||
|
* HAL drivers code
|
||||||
|
*/
|
||||||
|
/* #define USE_FULL_ASSERT 1U */
|
||||||
|
|
||||||
|
/* ################## Ethernet peripheral configuration ##################### */
|
||||||
|
|
||||||
|
/* Section 1 : Ethernet peripheral configuration */
|
||||||
|
|
||||||
|
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||||
|
#define MAC_ADDR0 2
|
||||||
|
#define MAC_ADDR1 0
|
||||||
|
#define MAC_ADDR2 0
|
||||||
|
#define MAC_ADDR3 0
|
||||||
|
#define MAC_ADDR4 0
|
||||||
|
#define MAC_ADDR5 0
|
||||||
|
|
||||||
|
/* Definition of the Ethernet driver buffers size and count */
|
||||||
|
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||||
|
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||||
|
#define ETH_RXBUFNB ((uint32_t)8) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||||
|
#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||||
|
|
||||||
|
/* Section 2: PHY configuration section */
|
||||||
|
|
||||||
|
/* DP83848_PHY_ADDRESS Address*/
|
||||||
|
#define DP83848_PHY_ADDRESS 0x01U
|
||||||
|
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||||
|
#define PHY_RESET_DELAY ((uint32_t)0x000000FF)
|
||||||
|
/* PHY Configuration delay */
|
||||||
|
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
|
||||||
|
|
||||||
|
#define PHY_READ_TO ((uint32_t)0x0000FFFF)
|
||||||
|
#define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
|
||||||
|
|
||||||
|
/* Section 3: Common PHY Registers */
|
||||||
|
|
||||||
|
#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
|
||||||
|
#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
|
||||||
|
|
||||||
|
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||||
|
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||||
|
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||||
|
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||||
|
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||||
|
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||||
|
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||||
|
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||||
|
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||||
|
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||||
|
|
||||||
|
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||||
|
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||||
|
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||||
|
|
||||||
|
/* Section 4: Extended PHY Registers */
|
||||||
|
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
|
||||||
|
|
||||||
|
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
|
||||||
|
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
/**
|
||||||
|
* @brief Include module's header file
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef HAL_RCC_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_rcc.h"
|
||||||
|
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_exti.h"
|
||||||
|
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_gpio.h"
|
||||||
|
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DMA_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_dma.h"
|
||||||
|
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_ETH_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_eth.h"
|
||||||
|
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CAN_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_can.h"
|
||||||
|
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CEC_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_cec.h"
|
||||||
|
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_cortex.h"
|
||||||
|
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_ADC_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_adc.h"
|
||||||
|
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CRC_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_crc.h"
|
||||||
|
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DAC_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_dac.h"
|
||||||
|
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_flash.h"
|
||||||
|
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_sram.h"
|
||||||
|
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_NOR_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_nor.h"
|
||||||
|
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_i2c.h"
|
||||||
|
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_I2S_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_i2s.h"
|
||||||
|
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_iwdg.h"
|
||||||
|
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PWR_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_pwr.h"
|
||||||
|
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_RTC_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_rtc.h"
|
||||||
|
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_pccard.h"
|
||||||
|
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SD_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_sd.h"
|
||||||
|
#endif /* HAL_SD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_MMC_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_mmc.h"
|
||||||
|
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_NAND_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_nand.h"
|
||||||
|
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_spi.h"
|
||||||
|
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_TIM_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_tim.h"
|
||||||
|
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_uart.h"
|
||||||
|
#endif /* HAL_UART_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_USART_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_usart.h"
|
||||||
|
#endif /* HAL_USART_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_irda.h"
|
||||||
|
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_smartcard.h"
|
||||||
|
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_wwdg.h"
|
||||||
|
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PCD_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_pcd.h"
|
||||||
|
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_HCD_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_hcd.h"
|
||||||
|
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
|
||||||
|
/* Exported macro ------------------------------------------------------------*/
|
||||||
|
#ifdef USE_FULL_ASSERT
|
||||||
|
/**
|
||||||
|
* @brief The assert_param macro is used for function's parameters check.
|
||||||
|
* @param expr: If expr is false, it calls assert_failed function
|
||||||
|
* which reports the name of the source file and the source
|
||||||
|
* line number of the call that failed.
|
||||||
|
* If expr is true, it returns no value.
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||||
|
/* Exported functions ------------------------------------------------------- */
|
||||||
|
void assert_failed(uint8_t* file, uint32_t line);
|
||||||
|
#else
|
||||||
|
#define assert_param(expr) ((void)0U)
|
||||||
|
#endif /* USE_FULL_ASSERT */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __STM32F1xx_HAL_CONF_H */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,72 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file stm32f1xx_it.h
|
||||||
|
* @brief This file contains the headers of the interrupt handlers.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __STM32F1xx_IT_H
|
||||||
|
#define __STM32F1xx_IT_H
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Private includes ----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* Exported types ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN ET */
|
||||||
|
|
||||||
|
/* USER CODE END ET */
|
||||||
|
|
||||||
|
/* Exported constants --------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN EC */
|
||||||
|
|
||||||
|
/* USER CODE END EC */
|
||||||
|
|
||||||
|
/* Exported macro ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN EM */
|
||||||
|
|
||||||
|
/* USER CODE END EM */
|
||||||
|
|
||||||
|
/* Exported functions prototypes ---------------------------------------------*/
|
||||||
|
void NMI_Handler(void);
|
||||||
|
void HardFault_Handler(void);
|
||||||
|
void MemManage_Handler(void);
|
||||||
|
void BusFault_Handler(void);
|
||||||
|
void UsageFault_Handler(void);
|
||||||
|
void SVC_Handler(void);
|
||||||
|
void DebugMon_Handler(void);
|
||||||
|
void PendSV_Handler(void);
|
||||||
|
void SysTick_Handler(void);
|
||||||
|
void DMA1_Channel4_IRQHandler(void);
|
||||||
|
void DMA1_Channel6_IRQHandler(void);
|
||||||
|
void USB_LP_CAN1_RX0_IRQHandler(void);
|
||||||
|
/* USER CODE BEGIN EFP */
|
||||||
|
|
||||||
|
/* USER CODE END EFP */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __STM32F1xx_IT_H */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,446 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/*
|
||||||
|
******************************************************************************
|
||||||
|
* @file : main.c
|
||||||
|
* @brief : Main program body
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
#include "usb_device.h"
|
||||||
|
|
||||||
|
/* Private includes ----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PTD */
|
||||||
|
|
||||||
|
/* USER CODE END PTD */
|
||||||
|
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PD */
|
||||||
|
|
||||||
|
/* USER CODE END PD */
|
||||||
|
|
||||||
|
/* Private macro -------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PM */
|
||||||
|
|
||||||
|
/* USER CODE END PM */
|
||||||
|
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
I2C_HandleTypeDef hi2c1;
|
||||||
|
DMA_HandleTypeDef hdma_i2c1_tx;
|
||||||
|
|
||||||
|
TIM_HandleTypeDef htim2;
|
||||||
|
TIM_HandleTypeDef htim3;
|
||||||
|
|
||||||
|
UART_HandleTypeDef huart1;
|
||||||
|
DMA_HandleTypeDef hdma_usart1_tx;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
void SystemClock_Config(void);
|
||||||
|
static void MX_GPIO_Init(void);
|
||||||
|
static void MX_DMA_Init(void);
|
||||||
|
static void MX_I2C1_Init(void);
|
||||||
|
static void MX_TIM2_Init(void);
|
||||||
|
static void MX_TIM3_Init(void);
|
||||||
|
static void MX_USART1_UART_Init(void);
|
||||||
|
/* USER CODE BEGIN PFP */
|
||||||
|
|
||||||
|
/* USER CODE END PFP */
|
||||||
|
|
||||||
|
/* Private user code ---------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief The application entry point.
|
||||||
|
* @retval int
|
||||||
|
*/
|
||||||
|
int main(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
|
||||||
|
/* MCU Configuration--------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||||
|
HAL_Init();
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Init */
|
||||||
|
|
||||||
|
/* USER CODE END Init */
|
||||||
|
|
||||||
|
/* Configure the system clock */
|
||||||
|
SystemClock_Config();
|
||||||
|
|
||||||
|
/* USER CODE BEGIN SysInit */
|
||||||
|
|
||||||
|
/* USER CODE END SysInit */
|
||||||
|
|
||||||
|
/* Initialize all configured peripherals */
|
||||||
|
MX_GPIO_Init();
|
||||||
|
MX_DMA_Init();
|
||||||
|
MX_I2C1_Init();
|
||||||
|
MX_TIM2_Init();
|
||||||
|
MX_TIM3_Init();
|
||||||
|
MX_USART1_UART_Init();
|
||||||
|
MX_USB_DEVICE_Init();
|
||||||
|
/* USER CODE BEGIN 2 */
|
||||||
|
|
||||||
|
/* USER CODE END 2 */
|
||||||
|
|
||||||
|
/* Infinite loop */
|
||||||
|
/* USER CODE BEGIN WHILE */
|
||||||
|
while (1)
|
||||||
|
{
|
||||||
|
/* USER CODE END WHILE */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 3 */
|
||||||
|
}
|
||||||
|
/* USER CODE END 3 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief System Clock Configuration
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void SystemClock_Config(void)
|
||||||
|
{
|
||||||
|
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||||
|
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
||||||
|
|
||||||
|
/** Initializes the CPU, AHB and APB busses clocks
|
||||||
|
*/
|
||||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||||
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||||
|
RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
|
||||||
|
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||||
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||||
|
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6;
|
||||||
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/** Initializes the CPU, AHB and APB busses clocks
|
||||||
|
*/
|
||||||
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||||
|
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV2;
|
||||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
|
||||||
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
|
||||||
|
PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL;
|
||||||
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief I2C1 Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_I2C1_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* USER CODE BEGIN I2C1_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN I2C1_Init 1 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_Init 1 */
|
||||||
|
hi2c1.Instance = I2C1;
|
||||||
|
hi2c1.Init.ClockSpeed = 100000;
|
||||||
|
hi2c1.Init.DutyCycle = I2C_DUTYCYCLE_2;
|
||||||
|
hi2c1.Init.OwnAddress1 = 0;
|
||||||
|
hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
|
||||||
|
hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
|
||||||
|
hi2c1.Init.OwnAddress2 = 0;
|
||||||
|
hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
|
||||||
|
hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
|
||||||
|
if (HAL_I2C_Init(&hi2c1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN I2C1_Init 2 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_Init 2 */
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief TIM2 Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_TIM2_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM2_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_Init 0 */
|
||||||
|
|
||||||
|
TIM_MasterConfigTypeDef sMasterConfig = {0};
|
||||||
|
TIM_OC_InitTypeDef sConfigOC = {0};
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM2_Init 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_Init 1 */
|
||||||
|
htim2.Instance = TIM2;
|
||||||
|
htim2.Init.Prescaler = 0;
|
||||||
|
htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||||
|
htim2.Init.Period = 0;
|
||||||
|
htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||||
|
htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||||
|
if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||||
|
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||||
|
if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
||||||
|
sConfigOC.Pulse = 0;
|
||||||
|
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||||
|
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||||
|
if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN TIM2_Init 2 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_Init 2 */
|
||||||
|
HAL_TIM_MspPostInit(&htim2);
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief TIM3 Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_TIM3_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM3_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM3_Init 0 */
|
||||||
|
|
||||||
|
TIM_MasterConfigTypeDef sMasterConfig = {0};
|
||||||
|
TIM_OC_InitTypeDef sConfigOC = {0};
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM3_Init 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM3_Init 1 */
|
||||||
|
htim3.Instance = TIM3;
|
||||||
|
htim3.Init.Prescaler = 0;
|
||||||
|
htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||||
|
htim3.Init.Period = 0;
|
||||||
|
htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||||
|
htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||||
|
if (HAL_TIM_PWM_Init(&htim3) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||||
|
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||||
|
if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
||||||
|
sConfigOC.Pulse = 0;
|
||||||
|
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||||
|
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||||
|
if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN TIM3_Init 2 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM3_Init 2 */
|
||||||
|
HAL_TIM_MspPostInit(&htim3);
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief USART1 Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_USART1_UART_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* USER CODE BEGIN USART1_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE END USART1_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN USART1_Init 1 */
|
||||||
|
|
||||||
|
/* USER CODE END USART1_Init 1 */
|
||||||
|
huart1.Instance = USART1;
|
||||||
|
huart1.Init.BaudRate = 115200;
|
||||||
|
huart1.Init.WordLength = UART_WORDLENGTH_8B;
|
||||||
|
huart1.Init.StopBits = UART_STOPBITS_1;
|
||||||
|
huart1.Init.Parity = UART_PARITY_NONE;
|
||||||
|
huart1.Init.Mode = UART_MODE_TX_RX;
|
||||||
|
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||||
|
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||||
|
if (HAL_UART_Init(&huart1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN USART1_Init 2 */
|
||||||
|
|
||||||
|
/* USER CODE END USART1_Init 2 */
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Enable DMA controller clock
|
||||||
|
*/
|
||||||
|
static void MX_DMA_Init(void)
|
||||||
|
{
|
||||||
|
/* DMA controller clock enable */
|
||||||
|
__HAL_RCC_DMA1_CLK_ENABLE();
|
||||||
|
|
||||||
|
/* DMA interrupt init */
|
||||||
|
/* DMA1_Channel4_IRQn interrupt configuration */
|
||||||
|
HAL_NVIC_SetPriority(DMA1_Channel4_IRQn, 0, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(DMA1_Channel4_IRQn);
|
||||||
|
/* DMA1_Channel6_IRQn interrupt configuration */
|
||||||
|
HAL_NVIC_SetPriority(DMA1_Channel6_IRQn, 0, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(DMA1_Channel6_IRQn);
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief GPIO Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_GPIO_Init(void)
|
||||||
|
{
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
|
||||||
|
/* GPIO Ports Clock Enable */
|
||||||
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||||
|
|
||||||
|
/*Configure GPIO pin Output Level */
|
||||||
|
HAL_GPIO_WritePin(GPIOA, LED2_Pin|LED1_Pin, GPIO_PIN_RESET);
|
||||||
|
|
||||||
|
/*Configure GPIO pins : PC13 PC14 PC15 */
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||||
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pins : LED2_Pin LED1_Pin */
|
||||||
|
GPIO_InitStruct.Pin = LED2_Pin|LED1_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pin : BigButton_Pin */
|
||||||
|
GPIO_InitStruct.Pin = BigButton_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
HAL_GPIO_Init(BigButton_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pins : PA4 PA5 PA6 PA8
|
||||||
|
PA15 */
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_8
|
||||||
|
|GPIO_PIN_15;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||||
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pins : PB0 PB1 PB2 PB10
|
||||||
|
PB11 PB13 PB14 PB3
|
||||||
|
PB4 PB5 PB8 PB9 */
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_10
|
||||||
|
|GPIO_PIN_11|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_3
|
||||||
|
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_8|GPIO_PIN_9;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||||
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pins : MinusButton_Pin PlusButton_Pin */
|
||||||
|
GPIO_InitStruct.Pin = MinusButton_Pin|PlusButton_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 4 */
|
||||||
|
|
||||||
|
/* USER CODE END 4 */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function is executed in case of error occurrence.
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void Error_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN Error_Handler_Debug */
|
||||||
|
/* User can add his own implementation to report the HAL error return state */
|
||||||
|
|
||||||
|
/* USER CODE END Error_Handler_Debug */
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef USE_FULL_ASSERT
|
||||||
|
/**
|
||||||
|
* @brief Reports the name of the source file and the source line number
|
||||||
|
* where the assert_param error has occurred.
|
||||||
|
* @param file: pointer to the source file name
|
||||||
|
* @param line: assert_param error line source number
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void assert_failed(uint8_t *file, uint32_t line)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN 6 */
|
||||||
|
/* User can add his own implementation to report the file name and line number,
|
||||||
|
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||||
|
/* USER CODE END 6 */
|
||||||
|
}
|
||||||
|
#endif /* USE_FULL_ASSERT */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,371 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : stm32f1xx_hal_msp.c
|
||||||
|
* Description : This file provides code for the MSP Initialization
|
||||||
|
* and de-Initialization codes.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
extern DMA_HandleTypeDef hdma_i2c1_tx;
|
||||||
|
|
||||||
|
extern DMA_HandleTypeDef hdma_usart1_tx;
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN TD */
|
||||||
|
|
||||||
|
/* USER CODE END TD */
|
||||||
|
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Define */
|
||||||
|
|
||||||
|
/* USER CODE END Define */
|
||||||
|
|
||||||
|
/* Private macro -------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Macro */
|
||||||
|
|
||||||
|
/* USER CODE END Macro */
|
||||||
|
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PFP */
|
||||||
|
|
||||||
|
/* USER CODE END PFP */
|
||||||
|
|
||||||
|
/* External functions --------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN ExternalFunctions */
|
||||||
|
|
||||||
|
/* USER CODE END ExternalFunctions */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
|
||||||
|
/**
|
||||||
|
* Initializes the Global MSP.
|
||||||
|
*/
|
||||||
|
void HAL_MspInit(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END MspInit 0 */
|
||||||
|
|
||||||
|
__HAL_RCC_AFIO_CLK_ENABLE();
|
||||||
|
__HAL_RCC_PWR_CLK_ENABLE();
|
||||||
|
|
||||||
|
/* System interrupt init*/
|
||||||
|
|
||||||
|
/** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
|
||||||
|
*/
|
||||||
|
__HAL_AFIO_REMAP_SWJ_NOJTAG();
|
||||||
|
|
||||||
|
/* USER CODE BEGIN MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END MspInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief I2C MSP Initialization
|
||||||
|
* This function configures the hardware resources used in this example
|
||||||
|
* @param hi2c: I2C handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
|
||||||
|
{
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
if(hi2c->Instance==I2C1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN I2C1_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_MspInit 0 */
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||||
|
/**I2C1 GPIO Configuration
|
||||||
|
PB6 ------> I2C1_SCL
|
||||||
|
PB7 ------> I2C1_SDA
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||||
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_I2C1_CLK_ENABLE();
|
||||||
|
|
||||||
|
/* I2C1 DMA Init */
|
||||||
|
/* I2C1_TX Init */
|
||||||
|
hdma_i2c1_tx.Instance = DMA1_Channel6;
|
||||||
|
hdma_i2c1_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
||||||
|
hdma_i2c1_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||||
|
hdma_i2c1_tx.Init.MemInc = DMA_MINC_ENABLE;
|
||||||
|
hdma_i2c1_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||||
|
hdma_i2c1_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||||
|
hdma_i2c1_tx.Init.Mode = DMA_NORMAL;
|
||||||
|
hdma_i2c1_tx.Init.Priority = DMA_PRIORITY_LOW;
|
||||||
|
if (HAL_DMA_Init(&hdma_i2c1_tx) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
__HAL_LINKDMA(hi2c,hdmatx,hdma_i2c1_tx);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN I2C1_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_MspInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief I2C MSP De-Initialization
|
||||||
|
* This function freeze the hardware resources used in this example
|
||||||
|
* @param hi2c: I2C handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
|
||||||
|
{
|
||||||
|
if(hi2c->Instance==I2C1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN I2C1_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_I2C1_CLK_DISABLE();
|
||||||
|
|
||||||
|
/**I2C1 GPIO Configuration
|
||||||
|
PB6 ------> I2C1_SCL
|
||||||
|
PB7 ------> I2C1_SDA
|
||||||
|
*/
|
||||||
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7);
|
||||||
|
|
||||||
|
/* I2C1 DMA DeInit */
|
||||||
|
HAL_DMA_DeInit(hi2c->hdmatx);
|
||||||
|
/* USER CODE BEGIN I2C1_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief TIM_PWM MSP Initialization
|
||||||
|
* This function configures the hardware resources used in this example
|
||||||
|
* @param htim_pwm: TIM_PWM handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef* htim_pwm)
|
||||||
|
{
|
||||||
|
if(htim_pwm->Instance==TIM2)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM2_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspInit 0 */
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_TIM2_CLK_ENABLE();
|
||||||
|
/* USER CODE BEGIN TIM2_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspInit 1 */
|
||||||
|
}
|
||||||
|
else if(htim_pwm->Instance==TIM3)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM3_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM3_MspInit 0 */
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_TIM3_CLK_ENABLE();
|
||||||
|
/* USER CODE BEGIN TIM3_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM3_MspInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
|
||||||
|
{
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
if(htim->Instance==TIM2)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM2_MspPostInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspPostInit 0 */
|
||||||
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||||
|
/**TIM2 GPIO Configuration
|
||||||
|
PA1 ------> TIM2_CH2
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = SPK1_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
HAL_GPIO_Init(SPK1_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM2_MspPostInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspPostInit 1 */
|
||||||
|
}
|
||||||
|
else if(htim->Instance==TIM3)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM3_MspPostInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM3_MspPostInit 0 */
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||||
|
/**TIM3 GPIO Configuration
|
||||||
|
PA7 ------> TIM3_CH2
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = SPK2_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
HAL_GPIO_Init(SPK2_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM3_MspPostInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM3_MspPostInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
/**
|
||||||
|
* @brief TIM_PWM MSP De-Initialization
|
||||||
|
* This function freeze the hardware resources used in this example
|
||||||
|
* @param htim_pwm: TIM_PWM handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef* htim_pwm)
|
||||||
|
{
|
||||||
|
if(htim_pwm->Instance==TIM2)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM2_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_TIM2_CLK_DISABLE();
|
||||||
|
/* USER CODE BEGIN TIM2_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
else if(htim_pwm->Instance==TIM3)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM3_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM3_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_TIM3_CLK_DISABLE();
|
||||||
|
/* USER CODE BEGIN TIM3_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM3_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief UART MSP Initialization
|
||||||
|
* This function configures the hardware resources used in this example
|
||||||
|
* @param huart: UART handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
||||||
|
{
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
if(huart->Instance==USART1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN USART1_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END USART1_MspInit 0 */
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_USART1_CLK_ENABLE();
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||||
|
/**USART1 GPIO Configuration
|
||||||
|
PA9 ------> USART1_TX
|
||||||
|
PA10 ------> USART1_RX
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_9;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||||
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_10;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* USART1 DMA Init */
|
||||||
|
/* USART1_TX Init */
|
||||||
|
hdma_usart1_tx.Instance = DMA1_Channel4;
|
||||||
|
hdma_usart1_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
||||||
|
hdma_usart1_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||||
|
hdma_usart1_tx.Init.MemInc = DMA_MINC_ENABLE;
|
||||||
|
hdma_usart1_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||||
|
hdma_usart1_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||||
|
hdma_usart1_tx.Init.Mode = DMA_NORMAL;
|
||||||
|
hdma_usart1_tx.Init.Priority = DMA_PRIORITY_LOW;
|
||||||
|
if (HAL_DMA_Init(&hdma_usart1_tx) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
__HAL_LINKDMA(huart,hdmatx,hdma_usart1_tx);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN USART1_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END USART1_MspInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief UART MSP De-Initialization
|
||||||
|
* This function freeze the hardware resources used in this example
|
||||||
|
* @param huart: UART handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
||||||
|
{
|
||||||
|
if(huart->Instance==USART1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END USART1_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_USART1_CLK_DISABLE();
|
||||||
|
|
||||||
|
/**USART1 GPIO Configuration
|
||||||
|
PA9 ------> USART1_TX
|
||||||
|
PA10 ------> USART1_RX
|
||||||
|
*/
|
||||||
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
|
||||||
|
|
||||||
|
/* USART1 DMA DeInit */
|
||||||
|
HAL_DMA_DeInit(huart->hdmatx);
|
||||||
|
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END USART1_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,247 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file stm32f1xx_it.c
|
||||||
|
* @brief Interrupt Service Routines.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
#include "stm32f1xx_it.h"
|
||||||
|
/* Private includes ----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN TD */
|
||||||
|
|
||||||
|
/* USER CODE END TD */
|
||||||
|
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PD */
|
||||||
|
|
||||||
|
/* USER CODE END PD */
|
||||||
|
|
||||||
|
/* Private macro -------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PM */
|
||||||
|
|
||||||
|
/* USER CODE END PM */
|
||||||
|
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PFP */
|
||||||
|
|
||||||
|
/* USER CODE END PFP */
|
||||||
|
|
||||||
|
/* Private user code ---------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
/* External variables --------------------------------------------------------*/
|
||||||
|
extern PCD_HandleTypeDef hpcd_USB_FS;
|
||||||
|
extern DMA_HandleTypeDef hdma_i2c1_tx;
|
||||||
|
extern DMA_HandleTypeDef hdma_usart1_tx;
|
||||||
|
/* USER CODE BEGIN EV */
|
||||||
|
|
||||||
|
/* USER CODE END EV */
|
||||||
|
|
||||||
|
/******************************************************************************/
|
||||||
|
/* Cortex-M3 Processor Interruption and Exception Handlers */
|
||||||
|
/******************************************************************************/
|
||||||
|
/**
|
||||||
|
* @brief This function handles Non maskable interrupt.
|
||||||
|
*/
|
||||||
|
void NMI_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||||
|
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles Hard fault interrupt.
|
||||||
|
*/
|
||||||
|
void HardFault_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END HardFault_IRQn 0 */
|
||||||
|
while (1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||||
|
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles Memory management fault.
|
||||||
|
*/
|
||||||
|
void MemManage_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||||
|
while (1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||||
|
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles Prefetch fault, memory access fault.
|
||||||
|
*/
|
||||||
|
void BusFault_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END BusFault_IRQn 0 */
|
||||||
|
while (1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||||
|
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles Undefined instruction or illegal state.
|
||||||
|
*/
|
||||||
|
void UsageFault_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END UsageFault_IRQn 0 */
|
||||||
|
while (1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||||
|
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles System service call via SWI instruction.
|
||||||
|
*/
|
||||||
|
void SVC_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN SVCall_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END SVCall_IRQn 0 */
|
||||||
|
/* USER CODE BEGIN SVCall_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END SVCall_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles Debug monitor.
|
||||||
|
*/
|
||||||
|
void DebugMon_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||||
|
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles Pendable request for system service.
|
||||||
|
*/
|
||||||
|
void PendSV_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN PendSV_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END PendSV_IRQn 0 */
|
||||||
|
/* USER CODE BEGIN PendSV_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END PendSV_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles System tick timer.
|
||||||
|
*/
|
||||||
|
void SysTick_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END SysTick_IRQn 0 */
|
||||||
|
HAL_IncTick();
|
||||||
|
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END SysTick_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/******************************************************************************/
|
||||||
|
/* STM32F1xx Peripheral Interrupt Handlers */
|
||||||
|
/* Add here the Interrupt Handlers for the used peripherals. */
|
||||||
|
/* For the available peripheral interrupt handler names, */
|
||||||
|
/* please refer to the startup file (startup_stm32f1xx.s). */
|
||||||
|
/******************************************************************************/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles DMA1 channel4 global interrupt.
|
||||||
|
*/
|
||||||
|
void DMA1_Channel4_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN DMA1_Channel4_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END DMA1_Channel4_IRQn 0 */
|
||||||
|
HAL_DMA_IRQHandler(&hdma_usart1_tx);
|
||||||
|
/* USER CODE BEGIN DMA1_Channel4_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END DMA1_Channel4_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles DMA1 channel6 global interrupt.
|
||||||
|
*/
|
||||||
|
void DMA1_Channel6_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN DMA1_Channel6_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END DMA1_Channel6_IRQn 0 */
|
||||||
|
HAL_DMA_IRQHandler(&hdma_i2c1_tx);
|
||||||
|
/* USER CODE BEGIN DMA1_Channel6_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END DMA1_Channel6_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles USB low priority or CAN RX0 interrupts.
|
||||||
|
*/
|
||||||
|
void USB_LP_CAN1_RX0_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN USB_LP_CAN1_RX0_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END USB_LP_CAN1_RX0_IRQn 0 */
|
||||||
|
HAL_PCD_IRQHandler(&hpcd_USB_FS);
|
||||||
|
/* USER CODE BEGIN USB_LP_CAN1_RX0_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END USB_LP_CAN1_RX0_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,448 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file system_stm32f1xx.c
|
||||||
|
* @author MCD Application Team
|
||||||
|
* @version V4.2.0
|
||||||
|
* @date 31-March-2017
|
||||||
|
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
|
||||||
|
*
|
||||||
|
* 1. This file provides two functions and one global variable to be called from
|
||||||
|
* user application:
|
||||||
|
* - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
|
||||||
|
* factors, AHB/APBx prescalers and Flash settings).
|
||||||
|
* This function is called at startup just after reset and
|
||||||
|
* before branch to main program. This call is made inside
|
||||||
|
* the "startup_stm32f1xx_xx.s" file.
|
||||||
|
*
|
||||||
|
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||||
|
* by the user application to setup the SysTick
|
||||||
|
* timer or configure other parameters.
|
||||||
|
*
|
||||||
|
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||||
|
* be called whenever the core clock is changed
|
||||||
|
* during program execution.
|
||||||
|
*
|
||||||
|
* 2. After each device reset the HSI (8 MHz) is used as system clock source.
|
||||||
|
* Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
|
||||||
|
* configure the system clock before to branch to main program.
|
||||||
|
*
|
||||||
|
* 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
|
||||||
|
* the product used), refer to "HSE_VALUE".
|
||||||
|
* When HSE is used as system clock source, directly or through PLL, and you
|
||||||
|
* are using different crystal you have to adapt the HSE value to your own
|
||||||
|
* configuration.
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without modification,
|
||||||
|
* are permitted provided that the following conditions are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer in the documentation
|
||||||
|
* and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup CMSIS
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup stm32f1xx_system
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup STM32F1xx_System_Private_Includes
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "stm32f1xx.h"
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup STM32F1xx_System_Private_Defines
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
#if !defined (HSE_VALUE)
|
||||||
|
#define HSE_VALUE 8000000U /*!< Default value of the External oscillator in Hz.
|
||||||
|
This value can be provided and adapted by the user application. */
|
||||||
|
#endif /* HSE_VALUE */
|
||||||
|
|
||||||
|
#if !defined (HSI_VALUE)
|
||||||
|
#define HSI_VALUE 8000000U /*!< Default value of the Internal oscillator in Hz.
|
||||||
|
This value can be provided and adapted by the user application. */
|
||||||
|
#endif /* HSI_VALUE */
|
||||||
|
|
||||||
|
/*!< Uncomment the following line if you need to use external SRAM */
|
||||||
|
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
/* #define DATA_IN_ExtSRAM */
|
||||||
|
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||||
|
|
||||||
|
/*!< Uncomment the following line if you need to relocate your vector Table in
|
||||||
|
Internal SRAM. */
|
||||||
|
/* #define VECT_TAB_SRAM */
|
||||||
|
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||||
|
This value must be a multiple of 0x200. */
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup STM32F1xx_System_Private_Macros
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup STM32F1xx_System_Private_Variables
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
* Clock Definitions
|
||||||
|
*******************************************************************************/
|
||||||
|
#if defined(STM32F100xB) ||defined(STM32F100xE)
|
||||||
|
uint32_t SystemCoreClock = 24000000U; /*!< System Clock Frequency (Core Clock) */
|
||||||
|
#else /*!< HSI Selected as System Clock source */
|
||||||
|
uint32_t SystemCoreClock = 72000000U; /*!< System Clock Frequency (Core Clock) */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||||
|
const uint8_t APBPrescTable[8U] = {0, 0, 0, 0, 1, 2, 3, 4};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
#ifdef DATA_IN_ExtSRAM
|
||||||
|
static void SystemInit_ExtMemCtl(void);
|
||||||
|
#endif /* DATA_IN_ExtSRAM */
|
||||||
|
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup STM32F1xx_System_Private_Functions
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Setup the microcontroller system
|
||||||
|
* Initialize the Embedded Flash Interface, the PLL and update the
|
||||||
|
* SystemCoreClock variable.
|
||||||
|
* @note This function should be used only after reset.
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void SystemInit (void)
|
||||||
|
{
|
||||||
|
/* Reset the RCC clock configuration to the default reset state(for debug purpose) */
|
||||||
|
/* Set HSION bit */
|
||||||
|
RCC->CR |= 0x00000001U;
|
||||||
|
|
||||||
|
/* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
|
||||||
|
#if !defined(STM32F105xC) && !defined(STM32F107xC)
|
||||||
|
RCC->CFGR &= 0xF8FF0000U;
|
||||||
|
#else
|
||||||
|
RCC->CFGR &= 0xF0FF0000U;
|
||||||
|
#endif /* STM32F105xC */
|
||||||
|
|
||||||
|
/* Reset HSEON, CSSON and PLLON bits */
|
||||||
|
RCC->CR &= 0xFEF6FFFFU;
|
||||||
|
|
||||||
|
/* Reset HSEBYP bit */
|
||||||
|
RCC->CR &= 0xFFFBFFFFU;
|
||||||
|
|
||||||
|
/* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
|
||||||
|
RCC->CFGR &= 0xFF80FFFFU;
|
||||||
|
|
||||||
|
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||||||
|
/* Reset PLL2ON and PLL3ON bits */
|
||||||
|
RCC->CR &= 0xEBFFFFFFU;
|
||||||
|
|
||||||
|
/* Disable all interrupts and clear pending bits */
|
||||||
|
RCC->CIR = 0x00FF0000U;
|
||||||
|
|
||||||
|
/* Reset CFGR2 register */
|
||||||
|
RCC->CFGR2 = 0x00000000U;
|
||||||
|
#elif defined(STM32F100xB) || defined(STM32F100xE)
|
||||||
|
/* Disable all interrupts and clear pending bits */
|
||||||
|
RCC->CIR = 0x009F0000U;
|
||||||
|
|
||||||
|
/* Reset CFGR2 register */
|
||||||
|
RCC->CFGR2 = 0x00000000U;
|
||||||
|
#else
|
||||||
|
/* Disable all interrupts and clear pending bits */
|
||||||
|
RCC->CIR = 0x009F0000U;
|
||||||
|
#endif /* STM32F105xC */
|
||||||
|
|
||||||
|
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
#ifdef DATA_IN_ExtSRAM
|
||||||
|
SystemInit_ExtMemCtl();
|
||||||
|
#endif /* DATA_IN_ExtSRAM */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef VECT_TAB_SRAM
|
||||||
|
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
|
||||||
|
#else
|
||||||
|
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||||
|
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||||
|
* be used by the user application to setup the SysTick timer or configure
|
||||||
|
* other parameters.
|
||||||
|
*
|
||||||
|
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||||
|
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||||
|
* based on this variable will be incorrect.
|
||||||
|
*
|
||||||
|
* @note - The system frequency computed by this function is not the real
|
||||||
|
* frequency in the chip. It is calculated based on the predefined
|
||||||
|
* constant and the selected clock source:
|
||||||
|
*
|
||||||
|
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
||||||
|
*
|
||||||
|
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
||||||
|
*
|
||||||
|
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||||||
|
* or HSI_VALUE(*) multiplied by the PLL factors.
|
||||||
|
*
|
||||||
|
* (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
|
||||||
|
* 8 MHz) but the real value may vary depending on the variations
|
||||||
|
* in voltage and temperature.
|
||||||
|
*
|
||||||
|
* (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
|
||||||
|
* 8 MHz or 25 MHz, depending on the product used), user has to ensure
|
||||||
|
* that HSE_VALUE is same as the real frequency of the crystal used.
|
||||||
|
* Otherwise, this function may have wrong result.
|
||||||
|
*
|
||||||
|
* - The result of this function could be not correct when using fractional
|
||||||
|
* value for HSE crystal.
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void SystemCoreClockUpdate (void)
|
||||||
|
{
|
||||||
|
uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;
|
||||||
|
|
||||||
|
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||||||
|
uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;
|
||||||
|
#endif /* STM32F105xC */
|
||||||
|
|
||||||
|
#if defined(STM32F100xB) || defined(STM32F100xE)
|
||||||
|
uint32_t prediv1factor = 0U;
|
||||||
|
#endif /* STM32F100xB or STM32F100xE */
|
||||||
|
|
||||||
|
/* Get SYSCLK source -------------------------------------------------------*/
|
||||||
|
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
||||||
|
|
||||||
|
switch (tmp)
|
||||||
|
{
|
||||||
|
case 0x00U: /* HSI used as system clock */
|
||||||
|
SystemCoreClock = HSI_VALUE;
|
||||||
|
break;
|
||||||
|
case 0x04U: /* HSE used as system clock */
|
||||||
|
SystemCoreClock = HSE_VALUE;
|
||||||
|
break;
|
||||||
|
case 0x08U: /* PLL used as system clock */
|
||||||
|
|
||||||
|
/* Get PLL clock source and multiplication factor ----------------------*/
|
||||||
|
pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
|
||||||
|
pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
|
||||||
|
|
||||||
|
#if !defined(STM32F105xC) && !defined(STM32F107xC)
|
||||||
|
pllmull = ( pllmull >> 18U) + 2U;
|
||||||
|
|
||||||
|
if (pllsource == 0x00U)
|
||||||
|
{
|
||||||
|
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
|
||||||
|
SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
#if defined(STM32F100xB) || defined(STM32F100xE)
|
||||||
|
prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
|
||||||
|
/* HSE oscillator clock selected as PREDIV1 clock entry */
|
||||||
|
SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
|
||||||
|
#else
|
||||||
|
/* HSE selected as PLL clock entry */
|
||||||
|
if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
|
||||||
|
{/* HSE oscillator clock divided by 2 */
|
||||||
|
SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
SystemCoreClock = HSE_VALUE * pllmull;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
pllmull = pllmull >> 18U;
|
||||||
|
|
||||||
|
if (pllmull != 0x0DU)
|
||||||
|
{
|
||||||
|
pllmull += 2U;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{ /* PLL multiplication factor = PLL input clock * 6.5 */
|
||||||
|
pllmull = 13U / 2U;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (pllsource == 0x00U)
|
||||||
|
{
|
||||||
|
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
|
||||||
|
SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{/* PREDIV1 selected as PLL clock entry */
|
||||||
|
|
||||||
|
/* Get PREDIV1 clock source and division factor */
|
||||||
|
prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
|
||||||
|
prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
|
||||||
|
|
||||||
|
if (prediv1source == 0U)
|
||||||
|
{
|
||||||
|
/* HSE oscillator clock selected as PREDIV1 clock entry */
|
||||||
|
SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{/* PLL2 clock selected as PREDIV1 clock entry */
|
||||||
|
|
||||||
|
/* Get PREDIV2 division factor and PLL2 multiplication factor */
|
||||||
|
prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;
|
||||||
|
pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U;
|
||||||
|
SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif /* STM32F105xC */
|
||||||
|
break;
|
||||||
|
|
||||||
|
default:
|
||||||
|
SystemCoreClock = HSI_VALUE;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Compute HCLK clock frequency ----------------*/
|
||||||
|
/* Get HCLK prescaler */
|
||||||
|
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
|
||||||
|
/* HCLK clock frequency */
|
||||||
|
SystemCoreClock >>= tmp;
|
||||||
|
}
|
||||||
|
|
||||||
|
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
/**
|
||||||
|
* @brief Setup the external memory controller. Called in startup_stm32f1xx.s
|
||||||
|
* before jump to __main
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#ifdef DATA_IN_ExtSRAM
|
||||||
|
/**
|
||||||
|
* @brief Setup the external memory controller.
|
||||||
|
* Called in startup_stm32f1xx_xx.s/.c before jump to main.
|
||||||
|
* This function configures the external SRAM mounted on STM3210E-EVAL
|
||||||
|
* board (STM32 High density devices). This SRAM will be used as program
|
||||||
|
* data memory (including heap and stack).
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void SystemInit_ExtMemCtl(void)
|
||||||
|
{
|
||||||
|
__IO uint32_t tmpreg;
|
||||||
|
/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is
|
||||||
|
required, then adjust the Register Addresses */
|
||||||
|
|
||||||
|
/* Enable FSMC clock */
|
||||||
|
RCC->AHBENR = 0x00000114U;
|
||||||
|
|
||||||
|
/* Delay after an RCC peripheral clock enabling */
|
||||||
|
tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
|
||||||
|
|
||||||
|
/* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
|
||||||
|
RCC->APB2ENR = 0x000001E0U;
|
||||||
|
|
||||||
|
/* Delay after an RCC peripheral clock enabling */
|
||||||
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
|
||||||
|
|
||||||
|
(void)(tmpreg);
|
||||||
|
|
||||||
|
/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
|
||||||
|
/*---------------- SRAM Address lines configuration -------------------------*/
|
||||||
|
/*---------------- NOE and NWE configuration --------------------------------*/
|
||||||
|
/*---------------- NE3 configuration ----------------------------------------*/
|
||||||
|
/*---------------- NBL0, NBL1 configuration ---------------------------------*/
|
||||||
|
|
||||||
|
GPIOD->CRL = 0x44BB44BBU;
|
||||||
|
GPIOD->CRH = 0xBBBBBBBBU;
|
||||||
|
|
||||||
|
GPIOE->CRL = 0xB44444BBU;
|
||||||
|
GPIOE->CRH = 0xBBBBBBBBU;
|
||||||
|
|
||||||
|
GPIOF->CRL = 0x44BBBBBBU;
|
||||||
|
GPIOF->CRH = 0xBBBB4444U;
|
||||||
|
|
||||||
|
GPIOG->CRL = 0x44BBBBBBU;
|
||||||
|
GPIOG->CRH = 0x444B4B44U;
|
||||||
|
|
||||||
|
/*---------------- FSMC Configuration ---------------------------------------*/
|
||||||
|
/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/
|
||||||
|
|
||||||
|
FSMC_Bank1->BTCR[4U] = 0x00001091U;
|
||||||
|
FSMC_Bank1->BTCR[5U] = 0x00110212U;
|
||||||
|
}
|
||||||
|
#endif /* DATA_IN_ExtSRAM */
|
||||||
|
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,210 @@
|
|||||||
|
##########################################################################################################################
|
||||||
|
# File automatically-generated by tool: [projectgenerator] version: [3.3.0] date: [Wed Jul 10 10:34:55 MSK 2019]
|
||||||
|
##########################################################################################################################
|
||||||
|
|
||||||
|
# ------------------------------------------------
|
||||||
|
# Generic Makefile (based on gcc)
|
||||||
|
#
|
||||||
|
# ChangeLog :
|
||||||
|
# 2017-02-10 - Several enhancements + project update mode
|
||||||
|
# 2015-07-22 - first version
|
||||||
|
# ------------------------------------------------
|
||||||
|
|
||||||
|
######################################
|
||||||
|
# target
|
||||||
|
######################################
|
||||||
|
TARGET = Uberdevice
|
||||||
|
|
||||||
|
|
||||||
|
######################################
|
||||||
|
# building variables
|
||||||
|
######################################
|
||||||
|
# debug build?
|
||||||
|
DEBUG = 1
|
||||||
|
# optimization
|
||||||
|
OPT = -Og -Os
|
||||||
|
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# paths
|
||||||
|
#######################################
|
||||||
|
# Build path
|
||||||
|
BUILD_DIR = build
|
||||||
|
|
||||||
|
######################################
|
||||||
|
# source
|
||||||
|
######################################
|
||||||
|
# C sources
|
||||||
|
C_SOURCES = \
|
||||||
|
Core/Src/main.c \
|
||||||
|
Core/Src/stm32f1xx_it.c \
|
||||||
|
Core/Src/stm32f1xx_hal_msp.c \
|
||||||
|
USB_DEVICE/App/usb_device.c \
|
||||||
|
USB_DEVICE/App/usbd_desc.c \
|
||||||
|
USB_DEVICE/App/usbd_cdc_if.c \
|
||||||
|
USB_DEVICE/Target/usbd_conf.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c \
|
||||||
|
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c \
|
||||||
|
Core/Src/system_stm32f1xx.c \
|
||||||
|
Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c \
|
||||||
|
Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c \
|
||||||
|
Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c \
|
||||||
|
Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c
|
||||||
|
|
||||||
|
# ASM sources
|
||||||
|
ASM_SOURCES = \
|
||||||
|
startup_stm32f103xb.s
|
||||||
|
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# binaries
|
||||||
|
#######################################
|
||||||
|
PREFIX = arm-none-eabi-
|
||||||
|
# The gcc compiler bin path can be either defined in make command via GCC_PATH variable (> make GCC_PATH=xxx)
|
||||||
|
# either it can be added to the PATH environment variable.
|
||||||
|
ifdef GCC_PATH
|
||||||
|
CC = $(GCC_PATH)/$(PREFIX)gcc
|
||||||
|
AS = $(GCC_PATH)/$(PREFIX)gcc -x assembler-with-cpp
|
||||||
|
CP = $(GCC_PATH)/$(PREFIX)objcopy
|
||||||
|
SZ = $(GCC_PATH)/$(PREFIX)size
|
||||||
|
else
|
||||||
|
CC = $(PREFIX)gcc
|
||||||
|
AS = $(PREFIX)gcc -x assembler-with-cpp
|
||||||
|
CP = $(PREFIX)objcopy
|
||||||
|
SZ = $(PREFIX)size
|
||||||
|
endif
|
||||||
|
HEX = $(CP) -O ihex
|
||||||
|
BIN = $(CP) -O binary -S
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# CFLAGS
|
||||||
|
#######################################
|
||||||
|
# cpu
|
||||||
|
CPU = -mcpu=cortex-m3
|
||||||
|
|
||||||
|
# fpu
|
||||||
|
# NONE for Cortex-M0/M0+/M3
|
||||||
|
|
||||||
|
# float-abi
|
||||||
|
|
||||||
|
|
||||||
|
# mcu
|
||||||
|
MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
|
||||||
|
|
||||||
|
# macros for gcc
|
||||||
|
# AS defines
|
||||||
|
AS_DEFS =
|
||||||
|
|
||||||
|
# C defines
|
||||||
|
C_DEFS = \
|
||||||
|
-DUSE_HAL_DRIVER \
|
||||||
|
-DSTM32F103xB \
|
||||||
|
-DUSE_HAL_DRIVER \
|
||||||
|
-DSTM32F103xB
|
||||||
|
|
||||||
|
|
||||||
|
# AS includes
|
||||||
|
AS_INCLUDES =
|
||||||
|
|
||||||
|
# C includes
|
||||||
|
C_INCLUDES = \
|
||||||
|
-IUSB_DEVICE/App \
|
||||||
|
-IUSB_DEVICE/Target \
|
||||||
|
-ICore/Inc \
|
||||||
|
-IDrivers/STM32F1xx_HAL_Driver/Inc \
|
||||||
|
-IDrivers/STM32F1xx_HAL_Driver/Inc/Legacy \
|
||||||
|
-IMiddlewares/ST/STM32_USB_Device_Library/Core/Inc \
|
||||||
|
-IMiddlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc \
|
||||||
|
-IDrivers/CMSIS/Device/ST/STM32F1xx/Include \
|
||||||
|
-IDrivers/CMSIS/Include \
|
||||||
|
-IDrivers/CMSIS/Include
|
||||||
|
|
||||||
|
|
||||||
|
# compile gcc flags
|
||||||
|
ASFLAGS = $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections -std=gnu11
|
||||||
|
|
||||||
|
CFLAGS = $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections -std=gnu11
|
||||||
|
|
||||||
|
ifeq ($(DEBUG), 1)
|
||||||
|
CFLAGS += -g -gdwarf-2
|
||||||
|
endif
|
||||||
|
|
||||||
|
|
||||||
|
# Generate dependency information
|
||||||
|
CFLAGS += -MMD -MP -MF"$(@:%.o=%.d)"
|
||||||
|
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# LDFLAGS
|
||||||
|
#######################################
|
||||||
|
# link script
|
||||||
|
LDSCRIPT = STM32F103C8Tx_FLASH.ld
|
||||||
|
|
||||||
|
# libraries
|
||||||
|
LIBS = -lc -lm -lnosys
|
||||||
|
LIBDIR =
|
||||||
|
LDFLAGS = $(MCU) -specs=nano.specs -T$(LDSCRIPT) $(LIBDIR) $(LIBS) -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref -Wl,--gc-sections
|
||||||
|
|
||||||
|
# default action: build all
|
||||||
|
all: $(BUILD_DIR)/$(TARGET).elf $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
|
||||||
|
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# build the application
|
||||||
|
#######################################
|
||||||
|
# list of objects
|
||||||
|
OBJECTS = $(addprefix $(BUILD_DIR)/,$(notdir $(C_SOURCES:.c=.o)))
|
||||||
|
vpath %.c $(sort $(dir $(C_SOURCES)))
|
||||||
|
# list of ASM program objects
|
||||||
|
OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(ASM_SOURCES:.s=.o)))
|
||||||
|
vpath %.s $(sort $(dir $(ASM_SOURCES)))
|
||||||
|
|
||||||
|
$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR)
|
||||||
|
@echo $<
|
||||||
|
$(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $@
|
||||||
|
|
||||||
|
$(BUILD_DIR)/%.o: %.s Makefile | $(BUILD_DIR)
|
||||||
|
@echo $<
|
||||||
|
$(AS) -c $(CFLAGS) $< -o $@
|
||||||
|
|
||||||
|
$(BUILD_DIR)/$(TARGET).elf: $(OBJECTS) Makefile
|
||||||
|
@echo $<
|
||||||
|
$(CC) $(OBJECTS) $(LDFLAGS) -o $@
|
||||||
|
$(SZ) $@
|
||||||
|
|
||||||
|
$(BUILD_DIR)/%.hex: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
|
||||||
|
$(HEX) $< $@
|
||||||
|
|
||||||
|
$(BUILD_DIR)/%.bin: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
|
||||||
|
$(BIN) $< $@
|
||||||
|
|
||||||
|
$(BUILD_DIR):
|
||||||
|
mkdir $@
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# clean up
|
||||||
|
#######################################
|
||||||
|
clean:
|
||||||
|
-rm -fR $(BUILD_DIR)
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# dependencies
|
||||||
|
#######################################
|
||||||
|
-include $(wildcard $(BUILD_DIR)/*.d)
|
||||||
|
|
||||||
|
# *** EOF ***
|
||||||
@ -0,0 +1,189 @@
|
|||||||
|
/*
|
||||||
|
******************************************************************************
|
||||||
|
**
|
||||||
|
|
||||||
|
** File : LinkerScript.ld
|
||||||
|
**
|
||||||
|
** Author : Auto-generated by Ac6 System Workbench
|
||||||
|
**
|
||||||
|
** Abstract : Linker script for STM32F103C8Tx series
|
||||||
|
** 64Kbytes FLASH and 20Kbytes RAM
|
||||||
|
**
|
||||||
|
** Set heap size, stack size and stack location according
|
||||||
|
** to application requirements.
|
||||||
|
**
|
||||||
|
** Set memory bank area and size if external memory is used.
|
||||||
|
**
|
||||||
|
** Target : STMicroelectronics STM32
|
||||||
|
**
|
||||||
|
** Distribution: The file is distributed “as is,” without any warranty
|
||||||
|
** of any kind.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
** @attention
|
||||||
|
**
|
||||||
|
** <h2><center>© COPYRIGHT(c) 2014 Ac6</center></h2>
|
||||||
|
**
|
||||||
|
** Redistribution and use in source and binary forms, with or without modification,
|
||||||
|
** are permitted provided that the following conditions are met:
|
||||||
|
** 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer.
|
||||||
|
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer in the documentation
|
||||||
|
** and/or other materials provided with the distribution.
|
||||||
|
** 3. Neither the name of Ac6 nor the names of its contributors
|
||||||
|
** may be used to endorse or promote products derived from this software
|
||||||
|
** without specific prior written permission.
|
||||||
|
**
|
||||||
|
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Entry Point */
|
||||||
|
ENTRY(Reset_Handler)
|
||||||
|
|
||||||
|
/* Highest address of the user mode stack */
|
||||||
|
_estack = 0x20005000; /* end of RAM */
|
||||||
|
/* Generate a link error if heap and stack don't fit into RAM */
|
||||||
|
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||||
|
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||||
|
|
||||||
|
/* Specify the memory areas */
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K
|
||||||
|
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 64K
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Define output sections */
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
/* The startup code goes first into FLASH */
|
||||||
|
.isr_vector :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
KEEP(*(.isr_vector)) /* Startup code */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* The program code and other data goes into FLASH */
|
||||||
|
.text :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.text) /* .text sections (code) */
|
||||||
|
*(.text*) /* .text* sections (code) */
|
||||||
|
*(.glue_7) /* glue arm to thumb code */
|
||||||
|
*(.glue_7t) /* glue thumb to arm code */
|
||||||
|
*(.eh_frame)
|
||||||
|
|
||||||
|
KEEP (*(.init))
|
||||||
|
KEEP (*(.fini))
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_etext = .; /* define a global symbols at end of code */
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* Constant data goes into FLASH */
|
||||||
|
.rodata :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||||
|
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||||
|
.ARM : {
|
||||||
|
__exidx_start = .;
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = .;
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.preinit_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||||
|
KEEP (*(.preinit_array*))
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.init_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__init_array_start = .);
|
||||||
|
KEEP (*(SORT(.init_array.*)))
|
||||||
|
KEEP (*(.init_array*))
|
||||||
|
PROVIDE_HIDDEN (__init_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.fini_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||||
|
KEEP (*(SORT(.fini_array.*)))
|
||||||
|
KEEP (*(.fini_array*))
|
||||||
|
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* used by the startup to initialize data */
|
||||||
|
_sidata = LOADADDR(.data);
|
||||||
|
|
||||||
|
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||||
|
.data :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
_sdata = .; /* create a global symbol at data start */
|
||||||
|
*(.data) /* .data sections */
|
||||||
|
*(.data*) /* .data* sections */
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_edata = .; /* define a global symbol at data end */
|
||||||
|
} >RAM AT> FLASH
|
||||||
|
|
||||||
|
|
||||||
|
/* Uninitialized data section */
|
||||||
|
. = ALIGN(4);
|
||||||
|
.bss :
|
||||||
|
{
|
||||||
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
__bss_start__ = _sbss;
|
||||||
|
*(.bss)
|
||||||
|
*(.bss*)
|
||||||
|
*(COMMON)
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_ebss = .; /* define a global symbol at bss end */
|
||||||
|
__bss_end__ = _ebss;
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
|
._user_heap_stack :
|
||||||
|
{
|
||||||
|
. = ALIGN(8);
|
||||||
|
PROVIDE ( end = . );
|
||||||
|
PROVIDE ( _end = . );
|
||||||
|
. = . + _Min_Heap_Size;
|
||||||
|
. = . + _Min_Stack_Size;
|
||||||
|
. = ALIGN(8);
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/* Remove information from the standard libraries */
|
||||||
|
/DISCARD/ :
|
||||||
|
{
|
||||||
|
libc.a ( * )
|
||||||
|
libm.a ( * )
|
||||||
|
libgcc.a ( * )
|
||||||
|
}
|
||||||
|
|
||||||
|
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
@ -0,0 +1,102 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : usb_device.c
|
||||||
|
* @version : v2.0_Cube
|
||||||
|
* @brief : This file implements the USB Device
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#include "usb_device.h"
|
||||||
|
#include "usbd_core.h"
|
||||||
|
#include "usbd_desc.h"
|
||||||
|
#include "usbd_cdc.h"
|
||||||
|
#include "usbd_cdc_if.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PFP */
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE END PFP */
|
||||||
|
|
||||||
|
/* USB Device Core handle declaration. */
|
||||||
|
USBD_HandleTypeDef hUsbDeviceFS;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* -- Insert your variables declaration here --
|
||||||
|
*/
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* -- Insert your external function declaration here --
|
||||||
|
*/
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Init USB device Library, add supported class and start the library
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void MX_USB_DEVICE_Init(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN USB_DEVICE_Init_PreTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END USB_DEVICE_Init_PreTreatment */
|
||||||
|
|
||||||
|
/* Init Device Library, add supported class and start the library. */
|
||||||
|
if (USBD_Init(&hUsbDeviceFS, &FS_Desc, DEVICE_FS) != USBD_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
if (USBD_RegisterClass(&hUsbDeviceFS, &USBD_CDC) != USBD_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
if (USBD_CDC_RegisterInterface(&hUsbDeviceFS, &USBD_Interface_fops_FS) != USBD_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
if (USBD_Start(&hUsbDeviceFS) != USBD_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN USB_DEVICE_Init_PostTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END USB_DEVICE_Init_PostTreatment */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,105 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : usb_device.h
|
||||||
|
* @version : v2.0_Cube
|
||||||
|
* @brief : Header for usb_device.c file.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __USB_DEVICE__H__
|
||||||
|
#define __USB_DEVICE__H__
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "stm32f1xx.h"
|
||||||
|
#include "stm32f1xx_hal.h"
|
||||||
|
#include "usbd_def.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN INCLUDE */
|
||||||
|
|
||||||
|
/* USER CODE END INCLUDE */
|
||||||
|
|
||||||
|
/** @addtogroup USBD_OTG_DRIVER
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DEVICE USBD_DEVICE
|
||||||
|
* @brief Device file for Usb otg low level driver.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DEVICE_Exported_Variables USBD_DEVICE_Exported_Variables
|
||||||
|
* @brief Public variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PFP */
|
||||||
|
|
||||||
|
/* USER CODE END PFP */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* -- Insert your variables declaration here --
|
||||||
|
*/
|
||||||
|
/* USER CODE BEGIN VARIABLES */
|
||||||
|
|
||||||
|
/* USER CODE END VARIABLES */
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DEVICE_Exported_FunctionsPrototype USBD_DEVICE_Exported_FunctionsPrototype
|
||||||
|
* @brief Declaration of public functions for Usb device.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** USB Device initialization function. */
|
||||||
|
void MX_USB_DEVICE_Init(void);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* -- Insert functions declaration here --
|
||||||
|
*/
|
||||||
|
/* USER CODE BEGIN FD */
|
||||||
|
|
||||||
|
/* USER CODE END FD */
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __USB_DEVICE__H__ */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,309 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : usbd_cdc_if.c
|
||||||
|
* @version : v2.0_Cube
|
||||||
|
* @brief : Usb device for Virtual Com Port.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "usbd_cdc_if.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN INCLUDE */
|
||||||
|
|
||||||
|
/* USER CODE END INCLUDE */
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
/* Private macro -------------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||||
|
* @brief Usb device library.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup USBD_CDC_IF
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Private_TypesDefinitions USBD_CDC_IF_Private_TypesDefinitions
|
||||||
|
* @brief Private types.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_TYPES */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_TYPES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Private_Defines USBD_CDC_IF_Private_Defines
|
||||||
|
* @brief Private defines.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_DEFINES */
|
||||||
|
/* Define size for the receive and transmit buffer over CDC */
|
||||||
|
/* It's up to user to redefine and/or remove those define */
|
||||||
|
#define APP_RX_DATA_SIZE 1000
|
||||||
|
#define APP_TX_DATA_SIZE 1000
|
||||||
|
/* USER CODE END PRIVATE_DEFINES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Private_Macros USBD_CDC_IF_Private_Macros
|
||||||
|
* @brief Private macros.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_MACRO */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_MACRO */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Private_Variables USBD_CDC_IF_Private_Variables
|
||||||
|
* @brief Private variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
/* Create buffer for reception and transmission */
|
||||||
|
/* It's up to user to redefine and/or remove those define */
|
||||||
|
/** Received data over USB are stored in this buffer */
|
||||||
|
uint8_t UserRxBufferFS[APP_RX_DATA_SIZE];
|
||||||
|
|
||||||
|
/** Data to send over USB CDC are stored in this buffer */
|
||||||
|
uint8_t UserTxBufferFS[APP_TX_DATA_SIZE];
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_VARIABLES */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_VARIABLES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Exported_Variables USBD_CDC_IF_Exported_Variables
|
||||||
|
* @brief Public variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
extern USBD_HandleTypeDef hUsbDeviceFS;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_VARIABLES */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_VARIABLES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Private_FunctionPrototypes USBD_CDC_IF_Private_FunctionPrototypes
|
||||||
|
* @brief Private functions declaration.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
static int8_t CDC_Init_FS(void);
|
||||||
|
static int8_t CDC_DeInit_FS(void);
|
||||||
|
static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length);
|
||||||
|
static int8_t CDC_Receive_FS(uint8_t* pbuf, uint32_t *Len);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_FUNCTIONS_DECLARATION */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_FUNCTIONS_DECLARATION */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
USBD_CDC_ItfTypeDef USBD_Interface_fops_FS =
|
||||||
|
{
|
||||||
|
CDC_Init_FS,
|
||||||
|
CDC_DeInit_FS,
|
||||||
|
CDC_Control_FS,
|
||||||
|
CDC_Receive_FS
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Private functions ---------------------------------------------------------*/
|
||||||
|
/**
|
||||||
|
* @brief Initializes the CDC media low layer over the FS USB IP
|
||||||
|
* @retval USBD_OK if all operations are OK else USBD_FAIL
|
||||||
|
*/
|
||||||
|
static int8_t CDC_Init_FS(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN 3 */
|
||||||
|
/* Set Application Buffers */
|
||||||
|
USBD_CDC_SetTxBuffer(&hUsbDeviceFS, UserTxBufferFS, 0);
|
||||||
|
USBD_CDC_SetRxBuffer(&hUsbDeviceFS, UserRxBufferFS);
|
||||||
|
return (USBD_OK);
|
||||||
|
/* USER CODE END 3 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief DeInitializes the CDC media low layer
|
||||||
|
* @retval USBD_OK if all operations are OK else USBD_FAIL
|
||||||
|
*/
|
||||||
|
static int8_t CDC_DeInit_FS(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN 4 */
|
||||||
|
return (USBD_OK);
|
||||||
|
/* USER CODE END 4 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Manage the CDC class requests
|
||||||
|
* @param cmd: Command code
|
||||||
|
* @param pbuf: Buffer containing command data (request parameters)
|
||||||
|
* @param length: Number of data to be sent (in bytes)
|
||||||
|
* @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
|
||||||
|
*/
|
||||||
|
static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN 5 */
|
||||||
|
switch(cmd)
|
||||||
|
{
|
||||||
|
case CDC_SEND_ENCAPSULATED_COMMAND:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CDC_GET_ENCAPSULATED_RESPONSE:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CDC_SET_COMM_FEATURE:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CDC_GET_COMM_FEATURE:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CDC_CLEAR_COMM_FEATURE:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
/*******************************************************************************/
|
||||||
|
/* Line Coding Structure */
|
||||||
|
/*-----------------------------------------------------------------------------*/
|
||||||
|
/* Offset | Field | Size | Value | Description */
|
||||||
|
/* 0 | dwDTERate | 4 | Number |Data terminal rate, in bits per second*/
|
||||||
|
/* 4 | bCharFormat | 1 | Number | Stop bits */
|
||||||
|
/* 0 - 1 Stop bit */
|
||||||
|
/* 1 - 1.5 Stop bits */
|
||||||
|
/* 2 - 2 Stop bits */
|
||||||
|
/* 5 | bParityType | 1 | Number | Parity */
|
||||||
|
/* 0 - None */
|
||||||
|
/* 1 - Odd */
|
||||||
|
/* 2 - Even */
|
||||||
|
/* 3 - Mark */
|
||||||
|
/* 4 - Space */
|
||||||
|
/* 6 | bDataBits | 1 | Number Data bits (5, 6, 7, 8 or 16). */
|
||||||
|
/*******************************************************************************/
|
||||||
|
case CDC_SET_LINE_CODING:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CDC_GET_LINE_CODING:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CDC_SET_CONTROL_LINE_STATE:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CDC_SEND_BREAK:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
default:
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
return (USBD_OK);
|
||||||
|
/* USER CODE END 5 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Data received over USB OUT endpoint are sent over CDC interface
|
||||||
|
* through this function.
|
||||||
|
*
|
||||||
|
* @note
|
||||||
|
* This function will block any OUT packet reception on USB endpoint
|
||||||
|
* untill exiting this function. If you exit this function before transfer
|
||||||
|
* is complete on CDC interface (ie. using DMA controller) it will result
|
||||||
|
* in receiving more data while previous ones are still not sent.
|
||||||
|
*
|
||||||
|
* @param Buf: Buffer of data to be received
|
||||||
|
* @param Len: Number of data received (in bytes)
|
||||||
|
* @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
|
||||||
|
*/
|
||||||
|
static int8_t CDC_Receive_FS(uint8_t* Buf, uint32_t *Len)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN 6 */
|
||||||
|
USBD_CDC_SetRxBuffer(&hUsbDeviceFS, &Buf[0]);
|
||||||
|
USBD_CDC_ReceivePacket(&hUsbDeviceFS);
|
||||||
|
return (USBD_OK);
|
||||||
|
/* USER CODE END 6 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief CDC_Transmit_FS
|
||||||
|
* Data to send over USB IN endpoint are sent over CDC interface
|
||||||
|
* through this function.
|
||||||
|
* @note
|
||||||
|
*
|
||||||
|
*
|
||||||
|
* @param Buf: Buffer of data to be sent
|
||||||
|
* @param Len: Number of data to be sent (in bytes)
|
||||||
|
* @retval USBD_OK if all operations are OK else USBD_FAIL or USBD_BUSY
|
||||||
|
*/
|
||||||
|
uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len)
|
||||||
|
{
|
||||||
|
uint8_t result = USBD_OK;
|
||||||
|
/* USER CODE BEGIN 7 */
|
||||||
|
USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*)hUsbDeviceFS.pClassData;
|
||||||
|
if (hcdc->TxState != 0){
|
||||||
|
return USBD_BUSY;
|
||||||
|
}
|
||||||
|
USBD_CDC_SetTxBuffer(&hUsbDeviceFS, Buf, Len);
|
||||||
|
result = USBD_CDC_TransmitPacket(&hUsbDeviceFS);
|
||||||
|
/* USER CODE END 7 */
|
||||||
|
return result;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,130 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : usbd_cdc_if.h
|
||||||
|
* @version : v2.0_Cube
|
||||||
|
* @brief : Header for usbd_cdc_if.c file.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __USBD_CDC_IF_H__
|
||||||
|
#define __USBD_CDC_IF_H__
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "usbd_cdc.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN INCLUDE */
|
||||||
|
|
||||||
|
/* USER CODE END INCLUDE */
|
||||||
|
|
||||||
|
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||||
|
* @brief For Usb device.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF USBD_CDC_IF
|
||||||
|
* @brief Usb VCP device module
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Exported_Defines USBD_CDC_IF_Exported_Defines
|
||||||
|
* @brief Defines.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
/* USER CODE BEGIN EXPORTED_DEFINES */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_DEFINES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Exported_Types USBD_CDC_IF_Exported_Types
|
||||||
|
* @brief Types.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_TYPES */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_TYPES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Exported_Macros USBD_CDC_IF_Exported_Macros
|
||||||
|
* @brief Aliases.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_MACRO */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_MACRO */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Exported_Variables USBD_CDC_IF_Exported_Variables
|
||||||
|
* @brief Public variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** CDC Interface callback. */
|
||||||
|
extern USBD_CDC_ItfTypeDef USBD_Interface_fops_FS;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_VARIABLES */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_VARIABLES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Exported_FunctionsPrototype USBD_CDC_IF_Exported_FunctionsPrototype
|
||||||
|
* @brief Public functions declaration.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_FUNCTIONS */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_FUNCTIONS */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __USBD_CDC_IF_H__ */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,397 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : App/usbd_desc.c
|
||||||
|
* @version : v2.0_Cube
|
||||||
|
* @brief : This file implements the USB device descriptors.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "usbd_core.h"
|
||||||
|
#include "usbd_desc.h"
|
||||||
|
#include "usbd_conf.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN INCLUDE */
|
||||||
|
|
||||||
|
/* USER CODE END INCLUDE */
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
/* Private macro -------------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup USBD_DESC
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_TypesDefinitions USBD_DESC_Private_TypesDefinitions
|
||||||
|
* @brief Private types.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_TYPES */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_TYPES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_Defines USBD_DESC_Private_Defines
|
||||||
|
* @brief Private defines.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define USBD_VID 1155
|
||||||
|
#define USBD_LANGID_STRING 1033
|
||||||
|
#define USBD_MANUFACTURER_STRING "STMicroelectronics"
|
||||||
|
#define USBD_PID_FS 22336
|
||||||
|
#define USBD_PRODUCT_STRING_FS "STM32 Virtual ComPort"
|
||||||
|
#define USBD_CONFIGURATION_STRING_FS "CDC Config"
|
||||||
|
#define USBD_INTERFACE_STRING_FS "CDC Interface"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_DEFINES */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_DEFINES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_Macros USBD_DESC_Private_Macros
|
||||||
|
* @brief Private macros.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_MACRO */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_MACRO */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_FunctionPrototypes USBD_DESC_Private_FunctionPrototypes
|
||||||
|
* @brief Private functions declaration.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
static void Get_SerialNum(void);
|
||||||
|
static void IntToUnicode(uint32_t value, uint8_t * pbuf, uint8_t len);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_FunctionPrototypes USBD_DESC_Private_FunctionPrototypes
|
||||||
|
* @brief Private functions declaration for FS.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||||
|
uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||||
|
uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||||
|
uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||||
|
uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||||
|
uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||||
|
uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||||
|
|
||||||
|
#ifdef USBD_SUPPORT_USER_STRING_DESC
|
||||||
|
uint8_t * USBD_FS_USRStringDesc(USBD_SpeedTypeDef speed, uint8_t idx, uint16_t *length);
|
||||||
|
#endif /* USBD_SUPPORT_USER_STRING_DESC */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
|
||||||
|
* @brief Private variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
USBD_DescriptorsTypeDef FS_Desc =
|
||||||
|
{
|
||||||
|
USBD_FS_DeviceDescriptor
|
||||||
|
, USBD_FS_LangIDStrDescriptor
|
||||||
|
, USBD_FS_ManufacturerStrDescriptor
|
||||||
|
, USBD_FS_ProductStrDescriptor
|
||||||
|
, USBD_FS_SerialStrDescriptor
|
||||||
|
, USBD_FS_ConfigStrDescriptor
|
||||||
|
, USBD_FS_InterfaceStrDescriptor
|
||||||
|
};
|
||||||
|
|
||||||
|
#if defined ( __ICCARM__ ) /* IAR Compiler */
|
||||||
|
#pragma data_alignment=4
|
||||||
|
#endif /* defined ( __ICCARM__ ) */
|
||||||
|
/** USB standard device descriptor. */
|
||||||
|
__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =
|
||||||
|
{
|
||||||
|
0x12, /*bLength */
|
||||||
|
USB_DESC_TYPE_DEVICE, /*bDescriptorType*/
|
||||||
|
0x00, /*bcdUSB */
|
||||||
|
0x02,
|
||||||
|
0x02, /*bDeviceClass*/
|
||||||
|
0x02, /*bDeviceSubClass*/
|
||||||
|
0x00, /*bDeviceProtocol*/
|
||||||
|
USB_MAX_EP0_SIZE, /*bMaxPacketSize*/
|
||||||
|
LOBYTE(USBD_VID), /*idVendor*/
|
||||||
|
HIBYTE(USBD_VID), /*idVendor*/
|
||||||
|
LOBYTE(USBD_PID_FS), /*idProduct*/
|
||||||
|
HIBYTE(USBD_PID_FS), /*idProduct*/
|
||||||
|
0x00, /*bcdDevice rel. 2.00*/
|
||||||
|
0x02,
|
||||||
|
USBD_IDX_MFC_STR, /*Index of manufacturer string*/
|
||||||
|
USBD_IDX_PRODUCT_STR, /*Index of product string*/
|
||||||
|
USBD_IDX_SERIAL_STR, /*Index of serial number string*/
|
||||||
|
USBD_MAX_NUM_CONFIGURATION /*bNumConfigurations*/
|
||||||
|
};
|
||||||
|
|
||||||
|
/* USB_DeviceDescriptor */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
|
||||||
|
* @brief Private variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
#if defined ( __ICCARM__ ) /* IAR Compiler */
|
||||||
|
#pragma data_alignment=4
|
||||||
|
#endif /* defined ( __ICCARM__ ) */
|
||||||
|
|
||||||
|
/** USB lang indentifier descriptor. */
|
||||||
|
__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END =
|
||||||
|
{
|
||||||
|
USB_LEN_LANGID_STR_DESC,
|
||||||
|
USB_DESC_TYPE_STRING,
|
||||||
|
LOBYTE(USBD_LANGID_STRING),
|
||||||
|
HIBYTE(USBD_LANGID_STRING)
|
||||||
|
};
|
||||||
|
|
||||||
|
#if defined ( __ICCARM__ ) /* IAR Compiler */
|
||||||
|
#pragma data_alignment=4
|
||||||
|
#endif /* defined ( __ICCARM__ ) */
|
||||||
|
/* Internal string descriptor. */
|
||||||
|
__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END;
|
||||||
|
|
||||||
|
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||||
|
#pragma data_alignment=4
|
||||||
|
#endif
|
||||||
|
__ALIGN_BEGIN uint8_t USBD_StringSerial[USB_SIZ_STRING_SERIAL] __ALIGN_END = {
|
||||||
|
USB_SIZ_STRING_SERIAL,
|
||||||
|
USB_DESC_TYPE_STRING,
|
||||||
|
};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_Functions USBD_DESC_Private_Functions
|
||||||
|
* @brief Private functions.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Return the device descriptor
|
||||||
|
* @param speed : Current device speed
|
||||||
|
* @param length : Pointer to data length variable
|
||||||
|
* @retval Pointer to descriptor buffer
|
||||||
|
*/
|
||||||
|
uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||||
|
{
|
||||||
|
UNUSED(speed);
|
||||||
|
*length = sizeof(USBD_FS_DeviceDesc);
|
||||||
|
return USBD_FS_DeviceDesc;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Return the LangID string descriptor
|
||||||
|
* @param speed : Current device speed
|
||||||
|
* @param length : Pointer to data length variable
|
||||||
|
* @retval Pointer to descriptor buffer
|
||||||
|
*/
|
||||||
|
uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||||
|
{
|
||||||
|
UNUSED(speed);
|
||||||
|
*length = sizeof(USBD_LangIDDesc);
|
||||||
|
return USBD_LangIDDesc;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Return the product string descriptor
|
||||||
|
* @param speed : Current device speed
|
||||||
|
* @param length : Pointer to data length variable
|
||||||
|
* @retval Pointer to descriptor buffer
|
||||||
|
*/
|
||||||
|
uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||||
|
{
|
||||||
|
if(speed == 0)
|
||||||
|
{
|
||||||
|
USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
|
||||||
|
}
|
||||||
|
return USBD_StrDesc;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Return the manufacturer string descriptor
|
||||||
|
* @param speed : Current device speed
|
||||||
|
* @param length : Pointer to data length variable
|
||||||
|
* @retval Pointer to descriptor buffer
|
||||||
|
*/
|
||||||
|
uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||||
|
{
|
||||||
|
UNUSED(speed);
|
||||||
|
USBD_GetString((uint8_t *)USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
|
||||||
|
return USBD_StrDesc;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Return the serial number string descriptor
|
||||||
|
* @param speed : Current device speed
|
||||||
|
* @param length : Pointer to data length variable
|
||||||
|
* @retval Pointer to descriptor buffer
|
||||||
|
*/
|
||||||
|
uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||||
|
{
|
||||||
|
UNUSED(speed);
|
||||||
|
*length = USB_SIZ_STRING_SERIAL;
|
||||||
|
|
||||||
|
/* Update the serial number string descriptor with the data from the unique
|
||||||
|
* ID */
|
||||||
|
Get_SerialNum();
|
||||||
|
|
||||||
|
return (uint8_t *) USBD_StringSerial;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Return the configuration string descriptor
|
||||||
|
* @param speed : Current device speed
|
||||||
|
* @param length : Pointer to data length variable
|
||||||
|
* @retval Pointer to descriptor buffer
|
||||||
|
*/
|
||||||
|
uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||||
|
{
|
||||||
|
if(speed == USBD_SPEED_HIGH)
|
||||||
|
{
|
||||||
|
USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
|
||||||
|
}
|
||||||
|
return USBD_StrDesc;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Return the interface string descriptor
|
||||||
|
* @param speed : Current device speed
|
||||||
|
* @param length : Pointer to data length variable
|
||||||
|
* @retval Pointer to descriptor buffer
|
||||||
|
*/
|
||||||
|
uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||||
|
{
|
||||||
|
if(speed == 0)
|
||||||
|
{
|
||||||
|
USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
|
||||||
|
}
|
||||||
|
return USBD_StrDesc;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Create the serial number string descriptor
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void Get_SerialNum(void)
|
||||||
|
{
|
||||||
|
uint32_t deviceserial0, deviceserial1, deviceserial2;
|
||||||
|
|
||||||
|
deviceserial0 = *(uint32_t *) DEVICE_ID1;
|
||||||
|
deviceserial1 = *(uint32_t *) DEVICE_ID2;
|
||||||
|
deviceserial2 = *(uint32_t *) DEVICE_ID3;
|
||||||
|
|
||||||
|
deviceserial0 += deviceserial2;
|
||||||
|
|
||||||
|
if (deviceserial0 != 0)
|
||||||
|
{
|
||||||
|
IntToUnicode(deviceserial0, &USBD_StringSerial[2], 8);
|
||||||
|
IntToUnicode(deviceserial1, &USBD_StringSerial[18], 4);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Convert Hex 32Bits value into char
|
||||||
|
* @param value: value to convert
|
||||||
|
* @param pbuf: pointer to the buffer
|
||||||
|
* @param len: buffer length
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void IntToUnicode(uint32_t value, uint8_t * pbuf, uint8_t len)
|
||||||
|
{
|
||||||
|
uint8_t idx = 0;
|
||||||
|
|
||||||
|
for (idx = 0; idx < len; idx++)
|
||||||
|
{
|
||||||
|
if (((value >> 28)) < 0xA)
|
||||||
|
{
|
||||||
|
pbuf[2 * idx] = (value >> 28) + '0';
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
pbuf[2 * idx] = (value >> 28) + 'A' - 10;
|
||||||
|
}
|
||||||
|
|
||||||
|
value = value << 4;
|
||||||
|
|
||||||
|
pbuf[2 * idx + 1] = 0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,145 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : usbd_desc.c
|
||||||
|
* @version : v2.0_Cube
|
||||||
|
* @brief : Header for usbd_conf.c file.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __USBD_DESC__C__
|
||||||
|
#define __USBD_DESC__C__
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "usbd_def.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN INCLUDE */
|
||||||
|
|
||||||
|
/* USER CODE END INCLUDE */
|
||||||
|
|
||||||
|
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC USBD_DESC
|
||||||
|
* @brief Usb device descriptors module.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Exported_Constants USBD_DESC_Exported_Constants
|
||||||
|
* @brief Constants.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
#define DEVICE_ID1 (UID_BASE)
|
||||||
|
#define DEVICE_ID2 (UID_BASE + 0x4)
|
||||||
|
#define DEVICE_ID3 (UID_BASE + 0x8)
|
||||||
|
|
||||||
|
#define USB_SIZ_STRING_SERIAL 0x1A
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_CONSTANTS */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_CONSTANTS */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Exported_Defines USBD_DESC_Exported_Defines
|
||||||
|
* @brief Defines.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_DEFINES */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_DEFINES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Exported_TypesDefinitions USBD_DESC_Exported_TypesDefinitions
|
||||||
|
* @brief Types.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_TYPES */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_TYPES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Exported_Macros USBD_DESC_Exported_Macros
|
||||||
|
* @brief Aliases.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_MACRO */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_MACRO */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Exported_Variables USBD_DESC_Exported_Variables
|
||||||
|
* @brief Public variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** Descriptor for the Usb device. */
|
||||||
|
extern USBD_DescriptorsTypeDef FS_Desc;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_VARIABLES */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_VARIABLES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Exported_FunctionsPrototype USBD_DESC_Exported_FunctionsPrototype
|
||||||
|
* @brief Public functions declaration.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_FUNCTIONS */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_FUNCTIONS */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __USBD_DESC__C__ */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,663 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : Target/usbd_conf.c
|
||||||
|
* @version : v2.0_Cube
|
||||||
|
* @brief : This file implements the board support package for the USB device library
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "stm32f1xx.h"
|
||||||
|
#include "stm32f1xx_hal.h"
|
||||||
|
#include "usbd_def.h"
|
||||||
|
#include "usbd_core.h"
|
||||||
|
#include "usbd_cdc.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
/* Private macro -------------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
PCD_HandleTypeDef hpcd_USB_FS;
|
||||||
|
void Error_Handler(void);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PFP */
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE END PFP */
|
||||||
|
|
||||||
|
/* Private functions ---------------------------------------------------------*/
|
||||||
|
static USBD_StatusTypeDef USBD_Get_USB_Status(HAL_StatusTypeDef hal_status);
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
|
||||||
|
else
|
||||||
|
void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
LL Driver Callbacks (PCD -> USB Device Library)
|
||||||
|
*******************************************************************************/
|
||||||
|
/* MSP Init */
|
||||||
|
|
||||||
|
void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
|
||||||
|
{
|
||||||
|
if(pcdHandle->Instance==USB)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN USB_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END USB_MspInit 0 */
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_USB_CLK_ENABLE();
|
||||||
|
|
||||||
|
/* Peripheral interrupt init */
|
||||||
|
HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 0, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn);
|
||||||
|
/* USER CODE BEGIN USB_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END USB_MspInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
|
||||||
|
{
|
||||||
|
if(pcdHandle->Instance==USB)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN USB_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END USB_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_USB_CLK_DISABLE();
|
||||||
|
|
||||||
|
/* Peripheral interrupt Deinit*/
|
||||||
|
HAL_NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN USB_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END USB_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Setup stage callback
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Data Out stage callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @param epnum: Endpoint number
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Data In stage callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @param epnum: Endpoint number
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief SOF callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Reset callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
|
||||||
|
|
||||||
|
if ( hpcd->Init.speed != PCD_SPEED_FULL)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* Set Speed. */
|
||||||
|
USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed);
|
||||||
|
|
||||||
|
/* Reset Device. */
|
||||||
|
USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Suspend callback.
|
||||||
|
* When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* Inform USB library that core enters in suspend Mode. */
|
||||||
|
USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData);
|
||||||
|
/* Enter in STOP mode. */
|
||||||
|
/* USER CODE BEGIN 2 */
|
||||||
|
if (hpcd->Init.low_power_enable)
|
||||||
|
{
|
||||||
|
/* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */
|
||||||
|
SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
|
||||||
|
}
|
||||||
|
/* USER CODE END 2 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Resume callback.
|
||||||
|
* When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN 3 */
|
||||||
|
|
||||||
|
/* USER CODE END 3 */
|
||||||
|
USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief ISOOUTIncomplete callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @param epnum: Endpoint number
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief ISOINIncomplete callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @param epnum: Endpoint number
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Connect callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Disconnect callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData);
|
||||||
|
}
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
LL Driver Interface (USB Device Library --> PCD)
|
||||||
|
*******************************************************************************/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Initializes the low level portion of the device driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
|
||||||
|
{
|
||||||
|
/* Init USB Ip. */
|
||||||
|
/* Link the driver to the stack. */
|
||||||
|
hpcd_USB_FS.pData = pdev;
|
||||||
|
pdev->pData = &hpcd_USB_FS;
|
||||||
|
|
||||||
|
hpcd_USB_FS.Instance = USB;
|
||||||
|
hpcd_USB_FS.Init.dev_endpoints = 8;
|
||||||
|
hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
|
||||||
|
hpcd_USB_FS.Init.low_power_enable = DISABLE;
|
||||||
|
hpcd_USB_FS.Init.lpm_enable = DISABLE;
|
||||||
|
hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
|
||||||
|
if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler( );
|
||||||
|
}
|
||||||
|
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
/* Register USB PCD CallBacks */
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SOF_CB_ID, PCD_SOFCallback);
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SETUPSTAGE_CB_ID, PCD_SetupStageCallback);
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_RESET_CB_ID, PCD_ResetCallback);
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SUSPEND_CB_ID, PCD_SuspendCallback);
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_RESUME_CB_ID, PCD_ResumeCallback);
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_CONNECT_CB_ID, PCD_ConnectCallback);
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_DISCONNECT_CB_ID, PCD_DisconnectCallback);
|
||||||
|
|
||||||
|
HAL_PCD_RegisterDataOutStageCallback(&hpcd_USB_FS, PCD_DataOutStageCallback);
|
||||||
|
HAL_PCD_RegisterDataInStageCallback(&hpcd_USB_FS, PCD_DataInStageCallback);
|
||||||
|
HAL_PCD_RegisterIsoOutIncpltCallback(&hpcd_USB_FS, PCD_ISOOUTIncompleteCallback);
|
||||||
|
HAL_PCD_RegisterIsoInIncpltCallback(&hpcd_USB_FS, PCD_ISOINIncompleteCallback);
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
/* USER CODE BEGIN EndPoint_Configuration */
|
||||||
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18);
|
||||||
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58);
|
||||||
|
/* USER CODE END EndPoint_Configuration */
|
||||||
|
/* USER CODE BEGIN EndPoint_Configuration_CDC */
|
||||||
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0xC0);
|
||||||
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x01 , PCD_SNG_BUF, 0x110);
|
||||||
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x82 , PCD_SNG_BUF, 0x100);
|
||||||
|
/* USER CODE END EndPoint_Configuration_CDC */
|
||||||
|
return USBD_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief De-Initializes the low level portion of the device driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_DeInit(pdev->pData);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Starts the low level portion of the device driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_Start(pdev->pData);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Stops the low level portion of the device driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_Stop(pdev->pData);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Opens an endpoint of the low level driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @param ep_type: Endpoint type
|
||||||
|
* @param ep_mps: Endpoint max packet size
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t ep_type, uint16_t ep_mps)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_EP_Open(pdev->pData, ep_addr, ep_mps, ep_type);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Closes an endpoint of the low level driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Flushes an endpoint of the Low Level Driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Sets a Stall condition on an endpoint of the Low Level Driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Clears a Stall condition on an endpoint of the Low Level Driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Returns Stall condition.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @retval Stall (1: Yes, 0: No)
|
||||||
|
*/
|
||||||
|
uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||||
|
{
|
||||||
|
PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData;
|
||||||
|
|
||||||
|
if((ep_addr & 0x80) == 0x80)
|
||||||
|
{
|
||||||
|
return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Assigns a USB address to the device.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param dev_addr: Device address
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Transmits data over an endpoint.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @param pbuf: Pointer to data to be sent
|
||||||
|
* @param size: Data size
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Prepares an endpoint for reception.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @param pbuf: Pointer to data to be received
|
||||||
|
* @param size: Data size
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Returns the last transfered packet size.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @retval Recived Data Size
|
||||||
|
*/
|
||||||
|
uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||||
|
{
|
||||||
|
return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Delays routine for the USB device library.
|
||||||
|
* @param Delay: Delay in ms
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void USBD_LL_Delay(uint32_t Delay)
|
||||||
|
{
|
||||||
|
HAL_Delay(Delay);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Static single allocation.
|
||||||
|
* @param size: Size of allocated memory
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void *USBD_static_malloc(uint32_t size)
|
||||||
|
{
|
||||||
|
static uint32_t mem[(sizeof(USBD_CDC_HandleTypeDef)/4)+1];/* On 32-bit boundary */
|
||||||
|
return mem;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Dummy memory free
|
||||||
|
* @param p: Pointer to allocated memory address
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void USBD_static_free(void *p)
|
||||||
|
{
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Software Device Connection
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @param state: Connection state (0: disconnected / 1: connected)
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
|
||||||
|
#else
|
||||||
|
void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN 6 */
|
||||||
|
if (state == 1)
|
||||||
|
{
|
||||||
|
/* Configure Low connection state. */
|
||||||
|
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
/* Configure High connection state. */
|
||||||
|
|
||||||
|
}
|
||||||
|
/* USER CODE END 6 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Retuns the USB status depending on the HAL status:
|
||||||
|
* @param hal_status: HAL status
|
||||||
|
* @retval USB status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_Get_USB_Status(HAL_StatusTypeDef hal_status)
|
||||||
|
{
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
switch (hal_status)
|
||||||
|
{
|
||||||
|
case HAL_OK :
|
||||||
|
usb_status = USBD_OK;
|
||||||
|
break;
|
||||||
|
case HAL_ERROR :
|
||||||
|
usb_status = USBD_FAIL;
|
||||||
|
break;
|
||||||
|
case HAL_BUSY :
|
||||||
|
usb_status = USBD_BUSY;
|
||||||
|
break;
|
||||||
|
case HAL_TIMEOUT :
|
||||||
|
usb_status = USBD_FAIL;
|
||||||
|
break;
|
||||||
|
default :
|
||||||
|
usb_status = USBD_FAIL;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,179 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : usbd_conf.h
|
||||||
|
* @version : v2.0_Cube
|
||||||
|
* @brief : Header for usbd_conf.c file.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __USBD_CONF__H__
|
||||||
|
#define __USBD_CONF__H__
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include <stdio.h>
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include <string.h>
|
||||||
|
#include "main.h"
|
||||||
|
#include "stm32f1xx.h"
|
||||||
|
#include "stm32f1xx_hal.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN INCLUDE */
|
||||||
|
|
||||||
|
/* USER CODE END INCLUDE */
|
||||||
|
|
||||||
|
/** @addtogroup USBD_OTG_DRIVER
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CONF USBD_CONF
|
||||||
|
* @brief Configuration file for Usb otg low level driver.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CONF_Exported_Variables USBD_CONF_Exported_Variables
|
||||||
|
* @brief Public variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CONF_Exported_Defines USBD_CONF_Exported_Defines
|
||||||
|
* @brief Defines for configuration of the Usb device.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*---------- -----------*/
|
||||||
|
#define USBD_MAX_NUM_INTERFACES 1
|
||||||
|
/*---------- -----------*/
|
||||||
|
#define USBD_MAX_NUM_CONFIGURATION 1
|
||||||
|
/*---------- -----------*/
|
||||||
|
#define USBD_MAX_STR_DESC_SIZ 512
|
||||||
|
/*---------- -----------*/
|
||||||
|
#define USBD_SUPPORT_USER_STRING 0
|
||||||
|
/*---------- -----------*/
|
||||||
|
#define USBD_DEBUG_LEVEL 0
|
||||||
|
/*---------- -----------*/
|
||||||
|
#define USBD_SELF_POWERED 1
|
||||||
|
/*---------- -----------*/
|
||||||
|
#define MAX_STATIC_ALLOC_SIZE 512
|
||||||
|
|
||||||
|
/****************************************/
|
||||||
|
/* #define for FS and HS identification */
|
||||||
|
#define DEVICE_FS 0
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CONF_Exported_Macros USBD_CONF_Exported_Macros
|
||||||
|
* @brief Aliases.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Memory management macros */
|
||||||
|
|
||||||
|
/** Alias for memory allocation. */
|
||||||
|
#define USBD_malloc (uint32_t *)USBD_static_malloc
|
||||||
|
|
||||||
|
/** Alias for memory release. */
|
||||||
|
#define USBD_free USBD_static_free
|
||||||
|
|
||||||
|
/** Alias for memory set. */
|
||||||
|
#define USBD_memset /* Not used */
|
||||||
|
|
||||||
|
/** Alias for memory copy. */
|
||||||
|
#define USBD_memcpy /* Not used */
|
||||||
|
|
||||||
|
/** Alias for delay. */
|
||||||
|
#define USBD_Delay HAL_Delay
|
||||||
|
|
||||||
|
/* For footprint reasons and since only one allocation is handled in the HID class
|
||||||
|
driver, the malloc/free is changed into a static allocation method */
|
||||||
|
void *USBD_static_malloc(uint32_t size);
|
||||||
|
void USBD_static_free(void *p);
|
||||||
|
|
||||||
|
/* DEBUG macros */
|
||||||
|
|
||||||
|
#if (USBD_DEBUG_LEVEL > 0)
|
||||||
|
#define USBD_UsrLog(...) printf(__VA_ARGS__);\
|
||||||
|
printf("\n");
|
||||||
|
#else
|
||||||
|
#define USBD_UsrLog(...)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if (USBD_DEBUG_LEVEL > 1)
|
||||||
|
|
||||||
|
#define USBD_ErrLog(...) printf("ERROR: ") ;\
|
||||||
|
printf(__VA_ARGS__);\
|
||||||
|
printf("\n");
|
||||||
|
#else
|
||||||
|
#define USBD_ErrLog(...)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if (USBD_DEBUG_LEVEL > 2)
|
||||||
|
#define USBD_DbgLog(...) printf("DEBUG : ") ;\
|
||||||
|
printf(__VA_ARGS__);\
|
||||||
|
printf("\n");
|
||||||
|
#else
|
||||||
|
#define USBD_DbgLog(...)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CONF_Exported_Types USBD_CONF_Exported_Types
|
||||||
|
* @brief Types.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CONF_Exported_FunctionsPrototype USBD_CONF_Exported_FunctionsPrototype
|
||||||
|
* @brief Declaration of public functions for Usb device.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Exported functions -------------------------------------------------------*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __USBD_CONF__H__ */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,197 @@
|
|||||||
|
#MicroXplorer Configuration settings - do not modify
|
||||||
|
Dma.I2C1_TX.0.Direction=DMA_MEMORY_TO_PERIPH
|
||||||
|
Dma.I2C1_TX.0.Instance=DMA1_Channel6
|
||||||
|
Dma.I2C1_TX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE
|
||||||
|
Dma.I2C1_TX.0.MemInc=DMA_MINC_ENABLE
|
||||||
|
Dma.I2C1_TX.0.Mode=DMA_NORMAL
|
||||||
|
Dma.I2C1_TX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
|
||||||
|
Dma.I2C1_TX.0.PeriphInc=DMA_PINC_DISABLE
|
||||||
|
Dma.I2C1_TX.0.Priority=DMA_PRIORITY_LOW
|
||||||
|
Dma.I2C1_TX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
|
||||||
|
Dma.Request0=I2C1_TX
|
||||||
|
Dma.Request1=USART1_TX
|
||||||
|
Dma.RequestsNb=2
|
||||||
|
Dma.USART1_TX.1.Direction=DMA_MEMORY_TO_PERIPH
|
||||||
|
Dma.USART1_TX.1.Instance=DMA1_Channel4
|
||||||
|
Dma.USART1_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE
|
||||||
|
Dma.USART1_TX.1.MemInc=DMA_MINC_ENABLE
|
||||||
|
Dma.USART1_TX.1.Mode=DMA_NORMAL
|
||||||
|
Dma.USART1_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
|
||||||
|
Dma.USART1_TX.1.PeriphInc=DMA_PINC_DISABLE
|
||||||
|
Dma.USART1_TX.1.Priority=DMA_PRIORITY_LOW
|
||||||
|
Dma.USART1_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
|
||||||
|
File.Version=6
|
||||||
|
KeepUserPlacement=false
|
||||||
|
Mcu.Family=STM32F1
|
||||||
|
Mcu.IP0=DMA
|
||||||
|
Mcu.IP1=I2C1
|
||||||
|
Mcu.IP2=NVIC
|
||||||
|
Mcu.IP3=RCC
|
||||||
|
Mcu.IP4=SYS
|
||||||
|
Mcu.IP5=TIM2
|
||||||
|
Mcu.IP6=TIM3
|
||||||
|
Mcu.IP7=USART1
|
||||||
|
Mcu.IP8=USB
|
||||||
|
Mcu.IP9=USB_DEVICE
|
||||||
|
Mcu.IPNb=10
|
||||||
|
Mcu.Name=STM32F103C(8-B)Tx
|
||||||
|
Mcu.Package=LQFP48
|
||||||
|
Mcu.Pin0=PD0-OSC_IN
|
||||||
|
Mcu.Pin1=PD1-OSC_OUT
|
||||||
|
Mcu.Pin10=PA10
|
||||||
|
Mcu.Pin11=PA11
|
||||||
|
Mcu.Pin12=PA12
|
||||||
|
Mcu.Pin13=PA13
|
||||||
|
Mcu.Pin14=PA14
|
||||||
|
Mcu.Pin15=PB6
|
||||||
|
Mcu.Pin16=PB7
|
||||||
|
Mcu.Pin17=VP_SYS_VS_Systick
|
||||||
|
Mcu.Pin18=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS
|
||||||
|
Mcu.Pin2=PA0-WKUP
|
||||||
|
Mcu.Pin3=PA1
|
||||||
|
Mcu.Pin4=PA2
|
||||||
|
Mcu.Pin5=PA3
|
||||||
|
Mcu.Pin6=PA7
|
||||||
|
Mcu.Pin7=PB12
|
||||||
|
Mcu.Pin8=PB15
|
||||||
|
Mcu.Pin9=PA9
|
||||||
|
Mcu.PinsNb=19
|
||||||
|
Mcu.ThirdPartyNb=0
|
||||||
|
Mcu.UserConstants=
|
||||||
|
Mcu.UserName=STM32F103C8Tx
|
||||||
|
MxCube.Version=5.2.1
|
||||||
|
MxDb.Version=DB.5.0.21
|
||||||
|
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
NVIC.DMA1_Channel4_IRQn=true\:0\:0\:false\:false\:true\:false\:true
|
||||||
|
NVIC.DMA1_Channel6_IRQn=true\:0\:0\:false\:false\:true\:false\:true
|
||||||
|
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
|
||||||
|
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
|
||||||
|
NVIC.USB_LP_CAN1_RX0_IRQn=true\:0\:0\:false\:false\:true\:false\:true
|
||||||
|
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
PA0-WKUP.GPIOParameters=GPIO_Label
|
||||||
|
PA0-WKUP.GPIO_Label=LED2
|
||||||
|
PA0-WKUP.Locked=true
|
||||||
|
PA0-WKUP.Signal=GPIO_Output
|
||||||
|
PA1.GPIOParameters=GPIO_Label
|
||||||
|
PA1.GPIO_Label=SPK1
|
||||||
|
PA1.Signal=S_TIM2_CH2
|
||||||
|
PA10.Mode=Asynchronous
|
||||||
|
PA10.Signal=USART1_RX
|
||||||
|
PA11.Mode=Device
|
||||||
|
PA11.Signal=USB_DM
|
||||||
|
PA12.Mode=Device
|
||||||
|
PA12.Signal=USB_DP
|
||||||
|
PA13.Mode=Serial_Wire
|
||||||
|
PA13.Signal=SYS_JTMS-SWDIO
|
||||||
|
PA14.Mode=Serial_Wire
|
||||||
|
PA14.Signal=SYS_JTCK-SWCLK
|
||||||
|
PA2.GPIOParameters=GPIO_Label
|
||||||
|
PA2.GPIO_Label=BigButton
|
||||||
|
PA2.Locked=true
|
||||||
|
PA2.Signal=GPIO_Input
|
||||||
|
PA3.GPIOParameters=GPIO_Label
|
||||||
|
PA3.GPIO_Label=LED1
|
||||||
|
PA3.Locked=true
|
||||||
|
PA3.Signal=GPIO_Output
|
||||||
|
PA7.GPIOParameters=GPIO_Label
|
||||||
|
PA7.GPIO_Label=SPK2
|
||||||
|
PA7.Signal=S_TIM3_CH2
|
||||||
|
PA9.Mode=Asynchronous
|
||||||
|
PA9.Signal=USART1_TX
|
||||||
|
PB12.GPIOParameters=GPIO_Label
|
||||||
|
PB12.GPIO_Label=MinusButton
|
||||||
|
PB12.Locked=true
|
||||||
|
PB12.Signal=GPIO_Input
|
||||||
|
PB15.GPIOParameters=GPIO_Label
|
||||||
|
PB15.GPIO_Label=PlusButton
|
||||||
|
PB15.Locked=true
|
||||||
|
PB15.Signal=GPIO_Input
|
||||||
|
PB6.Mode=I2C
|
||||||
|
PB6.Signal=I2C1_SCL
|
||||||
|
PB7.Mode=I2C
|
||||||
|
PB7.Signal=I2C1_SDA
|
||||||
|
PCC.Checker=false
|
||||||
|
PCC.Line=STM32F103
|
||||||
|
PCC.MCU=STM32F103C(8-B)Tx
|
||||||
|
PCC.PartNumber=STM32F103C8Tx
|
||||||
|
PCC.Seq0=0
|
||||||
|
PCC.Series=STM32F1
|
||||||
|
PCC.Temperature=25
|
||||||
|
PCC.Vdd=3.3
|
||||||
|
PD0-OSC_IN.Mode=HSE-External-Oscillator
|
||||||
|
PD0-OSC_IN.Signal=RCC_OSC_IN
|
||||||
|
PD1-OSC_OUT.Mode=HSE-External-Oscillator
|
||||||
|
PD1-OSC_OUT.Signal=RCC_OSC_OUT
|
||||||
|
PinOutPanel.RotationAngle=0
|
||||||
|
ProjectManager.AskForMigrate=true
|
||||||
|
ProjectManager.BackupPrevious=true
|
||||||
|
ProjectManager.CompilerOptimize=6
|
||||||
|
ProjectManager.ComputerToolchain=false
|
||||||
|
ProjectManager.CoupleFile=false
|
||||||
|
ProjectManager.CustomerFirmwarePackage=
|
||||||
|
ProjectManager.DefaultFWLocation=true
|
||||||
|
ProjectManager.DeletePrevious=true
|
||||||
|
ProjectManager.DeviceId=STM32F103C8Tx
|
||||||
|
ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.7.0
|
||||||
|
ProjectManager.FreePins=true
|
||||||
|
ProjectManager.HalAssertFull=false
|
||||||
|
ProjectManager.HeapSize=0x200
|
||||||
|
ProjectManager.KeepUserCode=true
|
||||||
|
ProjectManager.LastFirmware=true
|
||||||
|
ProjectManager.LibraryCopy=1
|
||||||
|
ProjectManager.MainLocation=Core/Src
|
||||||
|
ProjectManager.NoMain=false
|
||||||
|
ProjectManager.PreviousToolchain=
|
||||||
|
ProjectManager.ProjectBuild=false
|
||||||
|
ProjectManager.ProjectFileName=Uberdevice.ioc
|
||||||
|
ProjectManager.ProjectName=Uberdevice
|
||||||
|
ProjectManager.StackSize=0x400
|
||||||
|
ProjectManager.TargetToolchain=Makefile
|
||||||
|
ProjectManager.ToolChainLocation=
|
||||||
|
ProjectManager.UnderRoot=false
|
||||||
|
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-SystemClock_Config-RCC-false-HAL-false,4-MX_I2C1_Init-I2C1-false-HAL-true,5-MX_TIM2_Init-TIM2-false-HAL-true,6-MX_TIM3_Init-TIM3-false-HAL-true,7-MX_USART1_UART_Init-USART1-false-HAL-true,8-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL-true
|
||||||
|
RCC.ADCFreqValue=12000000
|
||||||
|
RCC.AHBCLKDivider=RCC_SYSCLK_DIV2
|
||||||
|
RCC.AHBFreq_Value=24000000
|
||||||
|
RCC.APB1Freq_Value=24000000
|
||||||
|
RCC.APB1TimFreq_Value=24000000
|
||||||
|
RCC.APB2Freq_Value=24000000
|
||||||
|
RCC.APB2TimFreq_Value=24000000
|
||||||
|
RCC.FCLKCortexFreq_Value=24000000
|
||||||
|
RCC.FamilyName=M
|
||||||
|
RCC.HCLKFreq_Value=24000000
|
||||||
|
RCC.IPParameters=ADCFreqValue,AHBCLKDivider,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,PLLMUL,SYSCLKFreq_VALUE,SYSCLKSource,TimSysFreq_Value,USBFreq_Value,VCOOutput2Freq_Value
|
||||||
|
RCC.MCOFreq_Value=48000000
|
||||||
|
RCC.PLLCLKFreq_Value=48000000
|
||||||
|
RCC.PLLMCOFreq_Value=24000000
|
||||||
|
RCC.PLLMUL=RCC_PLL_MUL6
|
||||||
|
RCC.SYSCLKFreq_VALUE=48000000
|
||||||
|
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
|
||||||
|
RCC.TimSysFreq_Value=24000000
|
||||||
|
RCC.USBFreq_Value=48000000
|
||||||
|
RCC.VCOOutput2Freq_Value=8000000
|
||||||
|
SH.S_TIM2_CH2.0=TIM2_CH2,PWM Generation2 CH2
|
||||||
|
SH.S_TIM2_CH2.ConfNb=1
|
||||||
|
SH.S_TIM3_CH2.0=TIM3_CH2,PWM Generation2 CH2
|
||||||
|
SH.S_TIM3_CH2.ConfNb=1
|
||||||
|
TIM2.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
|
||||||
|
TIM2.IPParameters=Channel-PWM Generation2 CH2
|
||||||
|
TIM3.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
|
||||||
|
TIM3.IPParameters=Channel-PWM Generation2 CH2
|
||||||
|
USART1.IPParameters=VirtualMode
|
||||||
|
USART1.VirtualMode=VM_ASYNC
|
||||||
|
USB_DEVICE.CLASS_NAME_FS=CDC
|
||||||
|
USB_DEVICE.IPParameters=VirtualMode,VirtualModeFS,CLASS_NAME_FS
|
||||||
|
USB_DEVICE.VirtualMode=Cdc
|
||||||
|
USB_DEVICE.VirtualModeFS=Cdc_FS
|
||||||
|
VP_SYS_VS_Systick.Mode=SysTick
|
||||||
|
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
|
||||||
|
VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Mode=CDC_FS
|
||||||
|
VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Signal=USB_DEVICE_VS_USB_DEVICE_CDC_FS
|
||||||
|
board=custom
|
||||||
@ -0,0 +1,379 @@
|
|||||||
|
/**
|
||||||
|
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||||
|
* @file startup_stm32f103xb.s
|
||||||
|
* @author MCD Application Team
|
||||||
|
* @version V4.2.0
|
||||||
|
* @date 31-March-2017
|
||||||
|
* @brief STM32F103xB Devices vector table for Atollic toolchain.
|
||||||
|
* This module performs:
|
||||||
|
* - Set the initial SP
|
||||||
|
* - Set the initial PC == Reset_Handler,
|
||||||
|
* - Set the vector table entries with the exceptions ISR address
|
||||||
|
* - Configure the clock system
|
||||||
|
* - Branches to main in the C library (which eventually
|
||||||
|
* calls main()).
|
||||||
|
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||||
|
* priority is Privileged, and the Stack is set to Main.
|
||||||
|
******************************************************************************
|
||||||
|
*
|
||||||
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without modification,
|
||||||
|
* are permitted provided that the following conditions are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer in the documentation
|
||||||
|
* and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
.syntax unified
|
||||||
|
.cpu cortex-m3
|
||||||
|
.fpu softvfp
|
||||||
|
.thumb
|
||||||
|
|
||||||
|
.global g_pfnVectors
|
||||||
|
.global Default_Handler
|
||||||
|
|
||||||
|
/* start address for the initialization values of the .data section.
|
||||||
|
defined in linker script */
|
||||||
|
.word _sidata
|
||||||
|
/* start address for the .data section. defined in linker script */
|
||||||
|
.word _sdata
|
||||||
|
/* end address for the .data section. defined in linker script */
|
||||||
|
.word _edata
|
||||||
|
/* start address for the .bss section. defined in linker script */
|
||||||
|
.word _sbss
|
||||||
|
/* end address for the .bss section. defined in linker script */
|
||||||
|
.word _ebss
|
||||||
|
|
||||||
|
.equ BootRAM, 0xF108F85F
|
||||||
|
/**
|
||||||
|
* @brief This is the code that gets called when the processor first
|
||||||
|
* starts execution following a reset event. Only the absolutely
|
||||||
|
* necessary set is performed, after which the application
|
||||||
|
* supplied main() routine is called.
|
||||||
|
* @param None
|
||||||
|
* @retval : None
|
||||||
|
*/
|
||||||
|
|
||||||
|
.section .text.Reset_Handler
|
||||||
|
.weak Reset_Handler
|
||||||
|
.type Reset_Handler, %function
|
||||||
|
Reset_Handler:
|
||||||
|
|
||||||
|
/* Copy the data segment initializers from flash to SRAM */
|
||||||
|
movs r1, #0
|
||||||
|
b LoopCopyDataInit
|
||||||
|
|
||||||
|
CopyDataInit:
|
||||||
|
ldr r3, =_sidata
|
||||||
|
ldr r3, [r3, r1]
|
||||||
|
str r3, [r0, r1]
|
||||||
|
adds r1, r1, #4
|
||||||
|
|
||||||
|
LoopCopyDataInit:
|
||||||
|
ldr r0, =_sdata
|
||||||
|
ldr r3, =_edata
|
||||||
|
adds r2, r0, r1
|
||||||
|
cmp r2, r3
|
||||||
|
bcc CopyDataInit
|
||||||
|
ldr r2, =_sbss
|
||||||
|
b LoopFillZerobss
|
||||||
|
/* Zero fill the bss segment. */
|
||||||
|
FillZerobss:
|
||||||
|
movs r3, #0
|
||||||
|
str r3, [r2], #4
|
||||||
|
|
||||||
|
LoopFillZerobss:
|
||||||
|
ldr r3, = _ebss
|
||||||
|
cmp r2, r3
|
||||||
|
bcc FillZerobss
|
||||||
|
|
||||||
|
/* Call the clock system intitialization function.*/
|
||||||
|
bl SystemInit
|
||||||
|
/* Call static constructors */
|
||||||
|
bl __libc_init_array
|
||||||
|
/* Call the application's entry point.*/
|
||||||
|
bl main
|
||||||
|
bx lr
|
||||||
|
.size Reset_Handler, .-Reset_Handler
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This is the code that gets called when the processor receives an
|
||||||
|
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||||
|
* the system state for examination by a debugger.
|
||||||
|
*
|
||||||
|
* @param None
|
||||||
|
* @retval : None
|
||||||
|
*/
|
||||||
|
.section .text.Default_Handler,"ax",%progbits
|
||||||
|
Default_Handler:
|
||||||
|
Infinite_Loop:
|
||||||
|
b Infinite_Loop
|
||||||
|
.size Default_Handler, .-Default_Handler
|
||||||
|
/******************************************************************************
|
||||||
|
*
|
||||||
|
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||||
|
* must be placed on this to ensure that it ends up at physical address
|
||||||
|
* 0x0000.0000.
|
||||||
|
*
|
||||||
|
******************************************************************************/
|
||||||
|
.section .isr_vector,"a",%progbits
|
||||||
|
.type g_pfnVectors, %object
|
||||||
|
.size g_pfnVectors, .-g_pfnVectors
|
||||||
|
|
||||||
|
|
||||||
|
g_pfnVectors:
|
||||||
|
|
||||||
|
.word _estack
|
||||||
|
.word Reset_Handler
|
||||||
|
.word NMI_Handler
|
||||||
|
.word HardFault_Handler
|
||||||
|
.word MemManage_Handler
|
||||||
|
.word BusFault_Handler
|
||||||
|
.word UsageFault_Handler
|
||||||
|
.word 0
|
||||||
|
.word 0
|
||||||
|
.word 0
|
||||||
|
.word 0
|
||||||
|
.word SVC_Handler
|
||||||
|
.word DebugMon_Handler
|
||||||
|
.word 0
|
||||||
|
.word PendSV_Handler
|
||||||
|
.word SysTick_Handler
|
||||||
|
.word WWDG_IRQHandler
|
||||||
|
.word PVD_IRQHandler
|
||||||
|
.word TAMPER_IRQHandler
|
||||||
|
.word RTC_IRQHandler
|
||||||
|
.word FLASH_IRQHandler
|
||||||
|
.word RCC_IRQHandler
|
||||||
|
.word EXTI0_IRQHandler
|
||||||
|
.word EXTI1_IRQHandler
|
||||||
|
.word EXTI2_IRQHandler
|
||||||
|
.word EXTI3_IRQHandler
|
||||||
|
.word EXTI4_IRQHandler
|
||||||
|
.word DMA1_Channel1_IRQHandler
|
||||||
|
.word DMA1_Channel2_IRQHandler
|
||||||
|
.word DMA1_Channel3_IRQHandler
|
||||||
|
.word DMA1_Channel4_IRQHandler
|
||||||
|
.word DMA1_Channel5_IRQHandler
|
||||||
|
.word DMA1_Channel6_IRQHandler
|
||||||
|
.word DMA1_Channel7_IRQHandler
|
||||||
|
.word ADC1_2_IRQHandler
|
||||||
|
.word USB_HP_CAN1_TX_IRQHandler
|
||||||
|
.word USB_LP_CAN1_RX0_IRQHandler
|
||||||
|
.word CAN1_RX1_IRQHandler
|
||||||
|
.word CAN1_SCE_IRQHandler
|
||||||
|
.word EXTI9_5_IRQHandler
|
||||||
|
.word TIM1_BRK_IRQHandler
|
||||||
|
.word TIM1_UP_IRQHandler
|
||||||
|
.word TIM1_TRG_COM_IRQHandler
|
||||||
|
.word TIM1_CC_IRQHandler
|
||||||
|
.word TIM2_IRQHandler
|
||||||
|
.word TIM3_IRQHandler
|
||||||
|
.word TIM4_IRQHandler
|
||||||
|
.word I2C1_EV_IRQHandler
|
||||||
|
.word I2C1_ER_IRQHandler
|
||||||
|
.word I2C2_EV_IRQHandler
|
||||||
|
.word I2C2_ER_IRQHandler
|
||||||
|
.word SPI1_IRQHandler
|
||||||
|
.word SPI2_IRQHandler
|
||||||
|
.word USART1_IRQHandler
|
||||||
|
.word USART2_IRQHandler
|
||||||
|
.word USART3_IRQHandler
|
||||||
|
.word EXTI15_10_IRQHandler
|
||||||
|
.word RTC_Alarm_IRQHandler
|
||||||
|
.word USBWakeUp_IRQHandler
|
||||||
|
.word 0
|
||||||
|
.word 0
|
||||||
|
.word 0
|
||||||
|
.word 0
|
||||||
|
.word 0
|
||||||
|
.word 0
|
||||||
|
.word 0
|
||||||
|
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||||
|
STM32F10x Medium Density devices. */
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
*
|
||||||
|
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||||
|
* As they are weak aliases, any function with the same name will override
|
||||||
|
* this definition.
|
||||||
|
*
|
||||||
|
*******************************************************************************/
|
||||||
|
|
||||||
|
.weak NMI_Handler
|
||||||
|
.thumb_set NMI_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak HardFault_Handler
|
||||||
|
.thumb_set HardFault_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak MemManage_Handler
|
||||||
|
.thumb_set MemManage_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak BusFault_Handler
|
||||||
|
.thumb_set BusFault_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak UsageFault_Handler
|
||||||
|
.thumb_set UsageFault_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak SVC_Handler
|
||||||
|
.thumb_set SVC_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak DebugMon_Handler
|
||||||
|
.thumb_set DebugMon_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak PendSV_Handler
|
||||||
|
.thumb_set PendSV_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak SysTick_Handler
|
||||||
|
.thumb_set SysTick_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak WWDG_IRQHandler
|
||||||
|
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak PVD_IRQHandler
|
||||||
|
.thumb_set PVD_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TAMPER_IRQHandler
|
||||||
|
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak RTC_IRQHandler
|
||||||
|
.thumb_set RTC_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak FLASH_IRQHandler
|
||||||
|
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak RCC_IRQHandler
|
||||||
|
.thumb_set RCC_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak EXTI0_IRQHandler
|
||||||
|
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak EXTI1_IRQHandler
|
||||||
|
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak EXTI2_IRQHandler
|
||||||
|
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak EXTI3_IRQHandler
|
||||||
|
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak EXTI4_IRQHandler
|
||||||
|
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA1_Channel1_IRQHandler
|
||||||
|
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA1_Channel2_IRQHandler
|
||||||
|
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA1_Channel3_IRQHandler
|
||||||
|
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA1_Channel4_IRQHandler
|
||||||
|
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA1_Channel5_IRQHandler
|
||||||
|
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA1_Channel6_IRQHandler
|
||||||
|
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA1_Channel7_IRQHandler
|
||||||
|
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak ADC1_2_IRQHandler
|
||||||
|
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak USB_HP_CAN1_TX_IRQHandler
|
||||||
|
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak USB_LP_CAN1_RX0_IRQHandler
|
||||||
|
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak CAN1_RX1_IRQHandler
|
||||||
|
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak CAN1_SCE_IRQHandler
|
||||||
|
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak EXTI9_5_IRQHandler
|
||||||
|
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TIM1_BRK_IRQHandler
|
||||||
|
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TIM1_UP_IRQHandler
|
||||||
|
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TIM1_TRG_COM_IRQHandler
|
||||||
|
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TIM1_CC_IRQHandler
|
||||||
|
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TIM2_IRQHandler
|
||||||
|
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TIM3_IRQHandler
|
||||||
|
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TIM4_IRQHandler
|
||||||
|
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak I2C1_EV_IRQHandler
|
||||||
|
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak I2C1_ER_IRQHandler
|
||||||
|
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak I2C2_EV_IRQHandler
|
||||||
|
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak I2C2_ER_IRQHandler
|
||||||
|
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak SPI1_IRQHandler
|
||||||
|
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak SPI2_IRQHandler
|
||||||
|
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak USART1_IRQHandler
|
||||||
|
.thumb_set USART1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak USART2_IRQHandler
|
||||||
|
.thumb_set USART2_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak USART3_IRQHandler
|
||||||
|
.thumb_set USART3_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak EXTI15_10_IRQHandler
|
||||||
|
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak RTC_Alarm_IRQHandler
|
||||||
|
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak USBWakeUp_IRQHandler
|
||||||
|
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
|
|
||||||
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,17 @@
|
|||||||
|
#
|
||||||
|
# STMicroelectronics ST-LINK/V1, ST-LINK/V2, ST-LINK/V2-1, STLINK-V3 in-circuit
|
||||||
|
# debugger/programmer
|
||||||
|
#
|
||||||
|
|
||||||
|
interface hla
|
||||||
|
hla_layout stlink
|
||||||
|
hla_device_desc "ST-LINK"
|
||||||
|
hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753
|
||||||
|
|
||||||
|
# Optionally specify the serial number of ST-LINK/V2 usb device. ST-LINK/V2
|
||||||
|
# devices seem to have serial numbers with unreadable characters. ST-LINK/V2
|
||||||
|
# firmware version >= V2.J21.S4 recommended to avoid issues with adapter serial
|
||||||
|
# number reset issues.
|
||||||
|
# eg.
|
||||||
|
#hla_serial "\xaa\xbc\x6e\x06\x50\x75\xff\x55\x17\x42\x19\x3f"
|
||||||
|
|
||||||
@ -0,0 +1,89 @@
|
|||||||
|
# script for stm32f1x family
|
||||||
|
|
||||||
|
#
|
||||||
|
# stm32 devices support both JTAG and SWD transports.
|
||||||
|
#
|
||||||
|
source [find target/swj-dp.tcl]
|
||||||
|
source [find mem_helper.tcl]
|
||||||
|
|
||||||
|
if { [info exists CHIPNAME] } {
|
||||||
|
set _CHIPNAME $CHIPNAME
|
||||||
|
} else {
|
||||||
|
set _CHIPNAME stm32f1x
|
||||||
|
}
|
||||||
|
|
||||||
|
set _ENDIAN little
|
||||||
|
|
||||||
|
# Work-area is a space in RAM used for flash programming
|
||||||
|
# By default use 4kB (as found on some STM32F100s)
|
||||||
|
if { [info exists WORKAREASIZE] } {
|
||||||
|
set _WORKAREASIZE $WORKAREASIZE
|
||||||
|
} else {
|
||||||
|
set _WORKAREASIZE 0x1000
|
||||||
|
}
|
||||||
|
|
||||||
|
# Allow overriding the Flash bank size
|
||||||
|
if { [info exists FLASH_SIZE] } {
|
||||||
|
set _FLASH_SIZE $FLASH_SIZE
|
||||||
|
} else {
|
||||||
|
# autodetect size
|
||||||
|
set _FLASH_SIZE 0
|
||||||
|
}
|
||||||
|
|
||||||
|
#jtag scan chain
|
||||||
|
if { [info exists CPUTAPID] } {
|
||||||
|
set _CPUTAPID $CPUTAPID
|
||||||
|
} else {
|
||||||
|
if { [using_jtag] } {
|
||||||
|
# See STM Document RM0008 Section 26.6.3
|
||||||
|
set _CPUTAPID 0x3ba00477
|
||||||
|
} {
|
||||||
|
# this is the SW-DP tap id not the jtag tap id
|
||||||
|
set _CPUTAPID 0x1ba01477
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
|
||||||
|
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
|
||||||
|
|
||||||
|
if {[using_jtag]} {
|
||||||
|
jtag newtap $_CHIPNAME bs -irlen 5
|
||||||
|
}
|
||||||
|
|
||||||
|
set _TARGETNAME $_CHIPNAME.cpu
|
||||||
|
target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
|
||||||
|
|
||||||
|
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
|
||||||
|
|
||||||
|
# flash size will be probed
|
||||||
|
set _FLASHNAME $_CHIPNAME.flash
|
||||||
|
flash bank $_FLASHNAME stm32f1x 0x08000000 $_FLASH_SIZE 0 0 $_TARGETNAME
|
||||||
|
|
||||||
|
# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
|
||||||
|
adapter_khz 1000
|
||||||
|
|
||||||
|
adapter_nsrst_delay 100
|
||||||
|
if {[using_jtag]} {
|
||||||
|
jtag_ntrst_delay 100
|
||||||
|
}
|
||||||
|
|
||||||
|
reset_config srst_nogate
|
||||||
|
|
||||||
|
if {![using_hla]} {
|
||||||
|
# if srst is not fitted use SYSRESETREQ to
|
||||||
|
# perform a soft reset
|
||||||
|
cortex_m reset_config sysresetreq
|
||||||
|
}
|
||||||
|
|
||||||
|
$_TARGETNAME configure -event examine-end {
|
||||||
|
# DBGMCU_CR |= DBG_WWDG_STOP | DBG_IWDG_STOP |
|
||||||
|
# DBG_STANDBY | DBG_STOP | DBG_SLEEP
|
||||||
|
mmw 0xE0042004 0x00000307 0
|
||||||
|
}
|
||||||
|
|
||||||
|
$_TARGETNAME configure -event trace-config {
|
||||||
|
# Set TRACE_IOEN; TRACE_MODE is set to async; when using sync
|
||||||
|
# change this value accordingly to configure trace pins
|
||||||
|
# assignment
|
||||||
|
mmw 0xE0042004 0x00000020 0
|
||||||
|
}
|
||||||
Loading…
Reference in new issue