updated cubemx

.mxproject

@@ -1,36 +1,26 @@
+[PreviousLibFiles]
+LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2c.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2c.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/cmsis_compiler.h;
+
+[PreviousUsedMakefileFiles]
+SourceFiles=Core/Src/main.c;Core/Src/stm32f1xx_it.c;Core/Src/stm32f1xx_hal_msp.c;Core/Src/stm32f1xx_hal_timebase_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Core/Src/system_stm32f1xx.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Core/Src/system_stm32f1xx.c;;;
+HeaderPath=Drivers/STM32F1xx_HAL_Driver/Inc;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;Drivers/CMSIS/Device/ST/STM32F1xx/Include;Drivers/CMSIS/Include;Core/Inc;
+CDefines=USE_HAL_DRIVER;STM32F103xB;USE_HAL_DRIVER;USE_HAL_DRIVER;
+
 [PreviousGenFiles]
 AdvancedFolderStructure=true
 HeaderFileListSize=3
-HeaderFiles#0=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Inc/stm32f1xx_it.h
-HeaderFiles#1=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Inc/stm32f1xx_hal_conf.h
-HeaderFiles#2=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Inc/main.h
-HeaderFiles#3=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/App/usbd_cdc_if.h
-HeaderFiles#4=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Inc/stm32f1xx_it.h
-HeaderFiles#5=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Inc/stm32f1xx_hal_conf.h
-HeaderFiles#6=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Inc/main.h
+HeaderFiles#0=/home/dmaylarov/Documents/Uberdevice/Core/Inc/stm32f1xx_it.h
+HeaderFiles#1=/home/dmaylarov/Documents/Uberdevice/Core/Inc/stm32f1xx_hal_conf.h
+HeaderFiles#2=/home/dmaylarov/Documents/Uberdevice/Core/Inc/main.h
 HeaderFolderListSize=1
-HeaderPath#0=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Inc
-HeaderPath#1=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/Target
-HeaderPath#2=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Inc
+HeaderPath#0=/home/dmaylarov/Documents/Uberdevice/Core/Inc
+HeaderFiles=;
 SourceFileListSize=4
-SourceFiles#0=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Src/stm32f1xx_it.c
-SourceFiles#1=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Src/stm32f1xx_hal_msp.c
-SourceFiles#2=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Src/stm32f1xx_hal_timebase_tim.c
-SourceFiles#3=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Src/main.c
-SourceFiles#4=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Src/stm32f1xx_it.c
-SourceFiles#5=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Src/stm32f1xx_hal_msp.c
-SourceFiles#6=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Src/stm32f1xx_hal_timebase_tim.c
+SourceFiles#0=/home/dmaylarov/Documents/Uberdevice/Core/Src/stm32f1xx_it.c
+SourceFiles#1=/home/dmaylarov/Documents/Uberdevice/Core/Src/stm32f1xx_hal_msp.c
+SourceFiles#2=/home/dmaylarov/Documents/Uberdevice/Core/Src/stm32f1xx_hal_timebase_tim.c
+SourceFiles#3=/home/dmaylarov/Documents/Uberdevice/Core/Src/main.c
 SourceFolderListSize=1
-SourcePath#0=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Src
-SourcePath#1=C:/Users/And-STC/Documents/MDA/Uberdevice/USB_DEVICE/Target
-SourcePath#2=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Src
-SourceFiles#7=C:/Users/And-STC/Documents/MDA/Uberdevice/Core/Src/main.c
-
-[PreviousLibFiles]
-LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2c.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2c.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;
-
-[PreviousUsedMakefileFiles]
-SourceFiles=Core\Src\main.c;Core\Src\stm32f1xx_it.c;Core\Src\stm32f1xx_hal_msp.c;Core\Src\stm32f1xx_hal_timebase_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Core\Src/system_stm32f1xx.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Core\Src/system_stm32f1xx.c;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;null;
-HeaderPath=Drivers\STM32F1xx_HAL_Driver\Inc;Drivers\STM32F1xx_HAL_Driver\Inc\Legacy;Drivers\CMSIS\Device\ST\STM32F1xx\Include;Drivers\CMSIS\Include;Core\Inc;
-CDefines=USE_HAL_DRIVER;STM32F103xB;USE_HAL_DRIVER;STM32F103xB;
+SourcePath#0=/home/dmaylarov/Documents/Uberdevice/Core/Src
+SourceFiles=;
 

Core/Inc/stm32f1xx_hal_conf.h

@@ -5,32 +5,16 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
-  */ 
+  */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __STM32F1xx_HAL_CONF_H
@@ -45,13 +29,14 @@
 
 /* ########################## Module Selection ############################## */
 /**
-  * @brief This is the list of modules to be used in the HAL driver 
+  * @brief This is the list of modules to be used in the HAL driver
   */
-  
-#define HAL_MODULE_ENABLED  
-/*#define HAL_ADC_MODULE_ENABLED   */
+
+#define HAL_MODULE_ENABLED
+  /*#define HAL_ADC_MODULE_ENABLED   */
 /*#define HAL_CRYP_MODULE_ENABLED   */
 /*#define HAL_CAN_MODULE_ENABLED   */
+/*#define HAL_CAN_LEGACY_MODULE_ENABLED   */
 /*#define HAL_CEC_MODULE_ENABLED   */
 /*#define HAL_CORTEX_MODULE_ENABLED   */
 /*#define HAL_CRC_MODULE_ENABLED   */
@@ -82,11 +67,11 @@
 #define HAL_UART_MODULE_ENABLED
 /*#define HAL_USART_MODULE_ENABLED   */
 /*#define HAL_WWDG_MODULE_ENABLED   */
-/*#define HAL_EXTI_MODULE_ENABLED   */
 
 #define HAL_CORTEX_MODULE_ENABLED
 #define HAL_DMA_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
 #define HAL_PWR_MODULE_ENABLED
 #define HAL_RCC_MODULE_ENABLED
@@ -95,29 +80,29 @@
 /**
   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
   *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).  
+  *        (when HSE is used as system clock source, directly or through the PLL).
   */
-#if !defined  (HSE_VALUE) 
-  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    8000000U /*!< Value of the External oscillator in Hz */
 #endif /* HSE_VALUE */
 
 #if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */
+  #define HSE_STARTUP_TIMEOUT    100U   /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**
   * @brief Internal High Speed oscillator (HSI) value.
   *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL). 
+  *        (when HSI is used as system clock source, directly or through the PLL).
   */
 #if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+  #define HSI_VALUE    8000000U /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
 /**
   * @brief Internal Low Speed oscillator (LSI) value.
   */
-#if !defined  (LSI_VALUE) 
+#if !defined  (LSI_VALUE)
  #define LSI_VALUE               40000U    /*!< LSI Typical Value in Hz */
 #endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz
                                                 The real value may vary depending on the variations
@@ -128,11 +113,11 @@
   *        This value is used by the UART, RTC HAL module to compute the system frequency
   */
 #if !defined  (LSE_VALUE)
-  #define LSE_VALUE    ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
+  #define LSE_VALUE    32768U /*!< Value of the External oscillator in Hz*/
 #endif /* LSE_VALUE */
 
 #if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
+  #define LSE_STARTUP_TIMEOUT    5000U   /*!< Time out for LSE start up, in ms */
 #endif /* LSE_STARTUP_TIMEOUT */
 
 /* Tip: To avoid modifying this file each time you need to use different HSE,
@@ -141,15 +126,39 @@
 /* ########################### System Configuration ######################### */
 /**
   * @brief This is the HAL system configuration section
-  */     
-#define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */           
-#define  TICK_INT_PRIORITY            ((uint32_t)0)    /*!< tick interrupt priority (lowest by default)  */            
-#define  USE_RTOS                     0
-#define  PREFETCH_ENABLE              1
+  */
+#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            0U    /*!< tick interrupt priority (lowest by default)  */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
 
 /* ########################## Assert Selection ############################## */
 /**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
   *        HAL drivers code
   */
 /* #define USE_FULL_ASSERT    1U */
@@ -159,36 +168,36 @@
 /* Section 1 : Ethernet peripheral configuration */
 
 /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2
-#define MAC_ADDR1   0
-#define MAC_ADDR2   0
-#define MAC_ADDR3   0
-#define MAC_ADDR4   0
-#define MAC_ADDR5   0
-
-/* Definition of the Ethernet driver buffers size and count */   
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */
 #define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
 #define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)8)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)4)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+#define ETH_RXBUFNB                    8U       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
 
 /* Section 2: PHY configuration section */
 
-/* DP83848_PHY_ADDRESS Address*/ 
+/* DP83848_PHY_ADDRESS Address*/
 #define DP83848_PHY_ADDRESS           0x01U
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ 
-#define PHY_RESET_DELAY                 ((uint32_t)0x000000FF)
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY                 0x000000FFU
 /* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
+#define PHY_CONFIG_DELAY                0x00000FFFU
 
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
 
 /* Section 3: Common PHY Registers */
 
 #define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
 #define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
- 
+
 #define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
 #define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
 #define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
@@ -203,162 +212,174 @@
 #define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
 #define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
 #define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-  
+
 /* Section 4: Extended PHY Registers */
 #define PHY_SR                          ((uint16_t)0x10U)    /*!< PHY status register Offset                      */
 
 #define PHY_SPEED_STATUS                ((uint16_t)0x0002U)  /*!< PHY Speed mask                                  */
 #define PHY_DUPLEX_STATUS               ((uint16_t)0x0004U)  /*!< PHY Duplex mask                                 */
 
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     0U
+
 /* Includes ------------------------------------------------------------------*/
 /**
-  * @brief Include module's header file 
+  * @brief Include module's header file
   */
 
 #ifdef HAL_RCC_MODULE_ENABLED
- #include "stm32f1xx_hal_rcc.h"
+#include "stm32f1xx_hal_rcc.h"
 #endif /* HAL_RCC_MODULE_ENABLED */
 
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32f1xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
 #ifdef HAL_EXTI_MODULE_ENABLED
- #include "stm32f1xx_hal_exti.h"
+#include "stm32f1xx_hal_exti.h"
 #endif /* HAL_EXTI_MODULE_ENABLED */
 
-#ifdef HAL_GPIO_MODULE_ENABLED
- #include "stm32f1xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-   
 #ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f1xx_hal_dma.h"
+#include "stm32f1xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
-   
+
 #ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f1xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */  
-   
+#include "stm32f1xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
 #ifdef HAL_CAN_MODULE_ENABLED
- #include "stm32f1xx_hal_can.h"
+#include "stm32f1xx_hal_can.h"
 #endif /* HAL_CAN_MODULE_ENABLED */
 
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+  #include "Legacy/stm32f1xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
 #ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f1xx_hal_cec.h"
+#include "stm32f1xx_hal_cec.h"
 #endif /* HAL_CEC_MODULE_ENABLED */
 
 #ifdef HAL_CORTEX_MODULE_ENABLED
- #include "stm32f1xx_hal_cortex.h"
+#include "stm32f1xx_hal_cortex.h"
 #endif /* HAL_CORTEX_MODULE_ENABLED */
 
 #ifdef HAL_ADC_MODULE_ENABLED
- #include "stm32f1xx_hal_adc.h"
+#include "stm32f1xx_hal_adc.h"
 #endif /* HAL_ADC_MODULE_ENABLED */
 
 #ifdef HAL_CRC_MODULE_ENABLED
- #include "stm32f1xx_hal_crc.h"
+#include "stm32f1xx_hal_crc.h"
 #endif /* HAL_CRC_MODULE_ENABLED */
 
 #ifdef HAL_DAC_MODULE_ENABLED
- #include "stm32f1xx_hal_dac.h"
+#include "stm32f1xx_hal_dac.h"
 #endif /* HAL_DAC_MODULE_ENABLED */
 
 #ifdef HAL_FLASH_MODULE_ENABLED
- #include "stm32f1xx_hal_flash.h"
+#include "stm32f1xx_hal_flash.h"
 #endif /* HAL_FLASH_MODULE_ENABLED */
 
 #ifdef HAL_SRAM_MODULE_ENABLED
- #include "stm32f1xx_hal_sram.h"
+#include "stm32f1xx_hal_sram.h"
 #endif /* HAL_SRAM_MODULE_ENABLED */
 
 #ifdef HAL_NOR_MODULE_ENABLED
- #include "stm32f1xx_hal_nor.h"
+#include "stm32f1xx_hal_nor.h"
 #endif /* HAL_NOR_MODULE_ENABLED */
 
 #ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f1xx_hal_i2c.h"
+#include "stm32f1xx_hal_i2c.h"
 #endif /* HAL_I2C_MODULE_ENABLED */
 
 #ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f1xx_hal_i2s.h"
+#include "stm32f1xx_hal_i2s.h"
 #endif /* HAL_I2S_MODULE_ENABLED */
 
 #ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f1xx_hal_iwdg.h"
+#include "stm32f1xx_hal_iwdg.h"
 #endif /* HAL_IWDG_MODULE_ENABLED */
 
 #ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f1xx_hal_pwr.h"
+#include "stm32f1xx_hal_pwr.h"
 #endif /* HAL_PWR_MODULE_ENABLED */
 
 #ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f1xx_hal_rtc.h"
+#include "stm32f1xx_hal_rtc.h"
 #endif /* HAL_RTC_MODULE_ENABLED */
 
 #ifdef HAL_PCCARD_MODULE_ENABLED
- #include "stm32f1xx_hal_pccard.h"
-#endif /* HAL_PCCARD_MODULE_ENABLED */ 
+#include "stm32f1xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
 
 #ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f1xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */  
-
-#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32f1xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
+#include "stm32f1xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
 
 #ifdef HAL_NAND_MODULE_ENABLED
- #include "stm32f1xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */     
+#include "stm32f1xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
 
 #ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f1xx_hal_spi.h"
+#include "stm32f1xx_hal_spi.h"
 #endif /* HAL_SPI_MODULE_ENABLED */
 
 #ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f1xx_hal_tim.h"
+#include "stm32f1xx_hal_tim.h"
 #endif /* HAL_TIM_MODULE_ENABLED */
 
 #ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f1xx_hal_uart.h"
+#include "stm32f1xx_hal_uart.h"
 #endif /* HAL_UART_MODULE_ENABLED */
 
 #ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f1xx_hal_usart.h"
+#include "stm32f1xx_hal_usart.h"
 #endif /* HAL_USART_MODULE_ENABLED */
 
 #ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f1xx_hal_irda.h"
+#include "stm32f1xx_hal_irda.h"
 #endif /* HAL_IRDA_MODULE_ENABLED */
 
 #ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f1xx_hal_smartcard.h"
+#include "stm32f1xx_hal_smartcard.h"
 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
 
 #ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f1xx_hal_wwdg.h"
+#include "stm32f1xx_hal_wwdg.h"
 #endif /* HAL_WWDG_MODULE_ENABLED */
 
 #ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f1xx_hal_pcd.h"
+#include "stm32f1xx_hal_pcd.h"
 #endif /* HAL_PCD_MODULE_ENABLED */
 
 #ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f1xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */   
-   
+#include "stm32f1xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+#include "stm32f1xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
 
 /* Exported macro ------------------------------------------------------------*/
 #ifdef  USE_FULL_ASSERT
 /**
   * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
+  * @param  expr If expr is false, it calls assert_failed function
   *         which reports the name of the source file and the source
-  *         line number of the call that failed. 
+  *         line number of the call that failed.
   *         If expr is true, it returns no value.
   * @retval None
   */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
 /* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
+void assert_failed(uint8_t* file, uint32_t line);
 #else
-  #define assert_param(expr) ((void)0U)
+#define assert_param(expr) ((void)0U)
 #endif /* USE_FULL_ASSERT */
 
 #ifdef __cplusplus

Core/Inc/stm32f1xx_it.h

@@ -24,7 +24,7 @@
 
 #ifdef __cplusplus
  extern "C" {
-#endif 
+#endif
 
 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */

Core/Src/stm32f1xx_hal_msp.c

@@ -58,7 +58,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                                         /**
   * Initializes the Global MSP.
@@ -74,7 +74,7 @@ void HAL_MspInit(void)
 
   /* System interrupt init*/
 
-  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
   */
   __HAL_AFIO_REMAP_SWJ_NOJTAG();
 
@@ -97,11 +97,11 @@ void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
   /* USER CODE BEGIN I2C1_MspInit 0 */
 
   /* USER CODE END I2C1_MspInit 0 */
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**I2C1 GPIO Configuration    
+    /**I2C1 GPIO Configuration
     PB6     ------> I2C1_SCL
-    PB7     ------> I2C1_SDA 
+    PB7     ------> I2C1_SDA
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
@@ -132,12 +132,14 @@ void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
   /* USER CODE END I2C1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_I2C1_CLK_DISABLE();
-  
-    /**I2C1 GPIO Configuration    
+
+    /**I2C1 GPIO Configuration
     PB6     ------> I2C1_SCL
-    PB7     ------> I2C1_SDA 
+    PB7     ------> I2C1_SDA
     */
-    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7);
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6);
+
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_7);
 
   /* USER CODE BEGIN I2C1_MspDeInit 1 */
 
@@ -188,8 +190,8 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
 
   /* USER CODE END TIM2_MspPostInit 0 */
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**TIM2 GPIO Configuration    
-    PA1     ------> TIM2_CH2 
+    /**TIM2 GPIO Configuration
+    PA1     ------> TIM2_CH2
     */
     GPIO_InitStruct.Pin = SPK1_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -205,10 +207,10 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM3_MspPostInit 0 */
 
   /* USER CODE END TIM3_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**TIM3 GPIO Configuration    
-    PA7     ------> TIM3_CH2 
+    /**TIM3 GPIO Configuration
+    PA7     ------> TIM3_CH2
     */
     GPIO_InitStruct.Pin = SPK2_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -270,11 +272,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -308,10 +310,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 

Core/Src/stm32f1xx_hal_timebase_tim.c

@@ -21,21 +21,21 @@
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f1xx_hal.h"
 #include "stm32f1xx_hal_tim.h"
- 
+
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
-TIM_HandleTypeDef        htim4; 
+TIM_HandleTypeDef        htim4;
 /* Private function prototypes -----------------------------------------------*/
 /* Private functions ---------------------------------------------------------*/
 
 /**
-  * @brief  This function configures the TIM4 as a time base source. 
-  *         The time source is configured  to have 1ms time base with a dedicated 
-  *         Tick interrupt priority. 
+  * @brief  This function configures the TIM4 as a time base source.
+  *         The time source is configured  to have 1ms time base with a dedicated
+  *         Tick interrupt priority.
   * @note   This function is called  automatically at the beginning of program after
-  *         reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). 
+  *         reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig().
   * @param  TickPriority: Tick interrupt priority.
   * @retval HAL status
   */
@@ -45,44 +45,43 @@ HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
   uint32_t              uwTimclock = 0;
   uint32_t              uwPrescalerValue = 0;
   uint32_t              pFLatency;
-  
   /*Configure the TIM4 IRQ priority */
-  HAL_NVIC_SetPriority(TIM4_IRQn, TickPriority ,0); 
-  
+  HAL_NVIC_SetPriority(TIM4_IRQn, TickPriority ,0);
+
   /* Enable the TIM4 global Interrupt */
-  HAL_NVIC_EnableIRQ(TIM4_IRQn); 
-  
+  HAL_NVIC_EnableIRQ(TIM4_IRQn);
+
   /* Enable TIM4 clock */
   __HAL_RCC_TIM4_CLK_ENABLE();
-  
+
   /* Get clock configuration */
   HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);
-  
+
   /* Compute TIM4 clock */
   uwTimclock = HAL_RCC_GetPCLK1Freq();
-   
   /* Compute the prescaler value to have TIM4 counter clock equal to 1MHz */
-  uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000) - 1);
-  
+  uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000U) - 1U);
+
   /* Initialize TIM4 */
   htim4.Instance = TIM4;
-  
+
   /* Initialize TIMx peripheral as follow:
   + Period = [(TIM4CLK/1000) - 1]. to have a (1/1000) s time base.
   + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
   + ClockDivision = 0
   + Counter direction = Up
   */
-  htim4.Init.Period = (1000000 / 1000) - 1;
+  htim4.Init.Period = (1000000U / 1000U) - 1U;
   htim4.Init.Prescaler = uwPrescalerValue;
   htim4.Init.ClockDivision = 0;
   htim4.Init.CounterMode = TIM_COUNTERMODE_UP;
+
   if(HAL_TIM_Base_Init(&htim4) == HAL_OK)
   {
     /* Start the TIM time Base generation in interrupt mode */
     return HAL_TIM_Base_Start_IT(&htim4);
   }
-  
+
   /* Return function status */
   return HAL_ERROR;
 }
@@ -96,7 +95,7 @@ HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
 void HAL_SuspendTick(void)
 {
   /* Disable TIM4 update Interrupt */
-  __HAL_TIM_DISABLE_IT(&htim4, TIM_IT_UPDATE);                                                  
+  __HAL_TIM_DISABLE_IT(&htim4, TIM_IT_UPDATE);
 }
 
 /**

Core/Src/stm32f1xx_it.c

@@ -63,7 +63,7 @@ extern TIM_HandleTypeDef htim4;
 /* USER CODE END EV */
 
 /******************************************************************************/
-/*           Cortex-M3 Processor Interruption and Exception Handlers          */ 
+/*           Cortex-M3 Processor Interruption and Exception Handlers          */
 /******************************************************************************/
 /**
   * @brief This function handles Non maskable interrupt.
@@ -138,6 +138,18 @@ void UsageFault_Handler(void)
   }
 }
 
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVCall_IRQn 0 */
+
+  /* USER CODE END SVCall_IRQn 0 */
+  /* USER CODE BEGIN SVCall_IRQn 1 */
+
+  /* USER CODE END SVCall_IRQn 1 */
+}
 
 /**
   * @brief This function handles Debug monitor.
@@ -152,6 +164,32 @@ void DebugMon_Handler(void)
   /* USER CODE END DebugMonitor_IRQn 1 */
 }
 
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
 
 /******************************************************************************/
 /* STM32F1xx Peripheral Interrupt Handlers                                    */

Uberdevice.ioc

@@ -32,10 +32,11 @@ Mcu.PinsNb=16
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F103C8Tx
-MxCube.Version=5.2.1
-MxDb.Version=DB.5.0.21
+MxCube.Version=6.3.0
+MxDb.Version=DB.6.0.30
 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.ForceEnableDMAVector=true
 NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
@@ -84,18 +85,14 @@ PB15.GPIO_Label=PlusButton
 PB15.GPIO_PuPd=GPIO_PULLDOWN
 PB15.Locked=true
 PB15.Signal=GPIO_Input
+PB6.GPIOParameters=GPIO_Pu
+PB6.GPIO_Pu=GPIO_PULLUP
 PB6.Mode=I2C
 PB6.Signal=I2C1_SCL
+PB7.GPIOParameters=GPIO_Pu
+PB7.GPIO_Pu=GPIO_PULLUP
 PB7.Mode=I2C
 PB7.Signal=I2C1_SDA
-PCC.Checker=false
-PCC.Line=STM32F103
-PCC.MCU=STM32F103C(8-B)Tx
-PCC.PartNumber=STM32F103C8Tx
-PCC.Seq0=0
-PCC.Series=STM32F1
-PCC.Temperature=25
-PCC.Vdd=3.3
 PD0-OSC_IN.Mode=HSE-External-Oscillator
 PD0-OSC_IN.Signal=RCC_OSC_IN
 PD1-OSC_OUT.Mode=HSE-External-Oscillator
@@ -110,7 +107,7 @@ ProjectManager.CustomerFirmwarePackage=
 ProjectManager.DefaultFWLocation=true
 ProjectManager.DeletePrevious=true
 ProjectManager.DeviceId=STM32F103C8Tx
-ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.7.0
+ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.8.4
 ProjectManager.FreePins=true
 ProjectManager.HalAssertFull=false
 ProjectManager.HeapSize=0x200
@@ -123,11 +120,12 @@ ProjectManager.PreviousToolchain=
 ProjectManager.ProjectBuild=false
 ProjectManager.ProjectFileName=Uberdevice.ioc
 ProjectManager.ProjectName=Uberdevice
+ProjectManager.RegisterCallBack=
 ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=Makefile
 ProjectManager.ToolChainLocation=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-SystemClock_Config-RCC-false-HAL-false,4-MX_I2C1_Init-I2C1-false-HAL-true,5-MX_TIM2_Init-TIM2-false-HAL-true,6-MX_TIM3_Init-TIM3-false-HAL-true,7-MX_USART1_UART_Init-USART1-false-HAL-true,8-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_I2C1_Init-I2C1-false-HAL-true,4-MX_TIM2_Init-TIM2-false-HAL-true,5-MX_TIM3_Init-TIM3-false-HAL-true,6-MX_USART1_UART_Init-USART1-false-HAL-true
 RCC.ADCFreqValue=12000000
 RCC.AHBCLKDivider=RCC_SYSCLK_DIV2
 RCC.AHBFreq_Value=24000000