upd thingiverse customizer to use include sixinch_library, added https://github.com/KronBjorn/SixInchRack/pull/3

RackCabinets/ThingiverseCustomizer/thingiverse_customizer.scad

@@ -1,17 +1,7 @@
+include<../sixinch_library.scad>
 $fn = 50*1;
 
-
-
-
-   //////////////////////////////////////////////////
-  //  PASTE ALL OF: sixinch_library.scad IN HERE  //
- //   Thingiverse can only accept one file.      //
-//////////////////////////////////////////////////
-
-
-
-
-Part = "-"; // [a:All, b:FrontPlate, c:Cabinet, d:Lid, e:BackPlate, f:Handles]
+Part = "a"; // [a:All, b:FrontPlate, c:Cabinet, d:Lid, e:BackPlate, f:Handles]
 Units = 4;
 Depth = 115;
 
@@ -38,15 +28,3 @@ module go(){
         }
     }
 }
-
-
-
-
-
-
-
-
-
-
-
-

RackCabinets/sixinch_library.scad

@@ -21,7 +21,7 @@ slip              = 0.35;
 
 
 module chimney() {    
-for(i=[0:8:80]){
+    for(i=[0:8:80]){
         echo(i);
         translate([20 + (width-80)/2  +i,-1,20]){
             minkowski(){
@@ -29,14 +29,14 @@ for(i=[0:8:80]){
                 sphere(d=2,h=1);        
             }
         }
-}
+    }
 }
 
 
 
 
 
- module back_plate(u,dp,screw_top,screw_bottom,screw_side,square_hole,round_hole){
+module back_plate(u,dp,screw_top,screw_bottom,screw_side,square_hole,round_hole){
 
     difference(){
         union(){
@@ -88,7 +88,7 @@ for(i=[0:8:80]){
                 translate([20+6,    unit*p    ,gauge+dp+0.1]){rotate([0,180,0]){screw();}}   
             }
         }
-}
+    }
 }
 
 
@@ -170,7 +170,7 @@ module cabinet (dp,u,screw_bottom_front,round_peg,screw_side_front){
 
     }
 
-    }
+}
 
 
 
@@ -180,8 +180,8 @@ module box(dp,u,screw_bottom_front,round_peg,screw_side_front){
     difference(){
         translate([20,0,gauge]){
             difference(){
-                cube([115,u*unit,dp]);
-                translate([gauge_box,gauge_box,-1]){ cube([115-gauge_box*2,u*unit,dp+2]);}                        
+                cube([(sixinch-40),u*unit,dp]);
+                translate([gauge_box,gauge_box,-1]){ cube([(sixinch-40)-gauge_box*2,u*unit,dp+2]);}
             }            
         }
         //CHIMNEY
@@ -291,7 +291,7 @@ module lid(dp,u,screw_front,screw_back){
         chimney();
 
 
-}        
+    }        
 }
 
 
@@ -414,7 +414,7 @@ module leftbottomplate(t){
         translate([(sixinch+20)/2,-1,-1]){
             cube([(sixinch+20)/2+1,sixinch+20+2,t+2]);
         }
-       # translate([10,10,-1]){cylinder(r=2.5,h=base+2);}
+# translate([10,10,-1]){cylinder(r=2.5,h=base+2);}
         translate([10,sixinch+20-10,-1]){cylinder(r=2.5,h=base+2);}
 
 
@@ -428,12 +428,12 @@ module leftbottomplate(t){
 
 
 module bottomplate(t){
-translate([1,1,0]){
+    translate([1,1,0]){
         minkowski(){
             cube([sixinch+20-2,sixinch+20-2,t-1]);
             cylinder(r=1,h=1);
         }
-}
+    }
 }
 
 
@@ -508,8 +508,8 @@ module frontplate(u,square_hole,round_hole,round_peg,screw_side_front,screw_top,
             he = round_peg[i][4];  
             translate([x,y,gauge]){
                 difference(){
-                 #   cylinder(r=od/2,h=he);
-                 #   cylinder(r=id/2,h=he+1);
+#   cylinder(r=od/2,h=he);
+#   cylinder(r=id/2,h=he+1);
                 }        
             }
 
@@ -524,7 +524,7 @@ module frontplate(u,square_hole,round_hole,round_peg,screw_side_front,screw_top,
 
 
 
-    }
+}
 
 
 
@@ -552,7 +552,7 @@ module baseplate(u,handle){
             translate([10-0.5,(u*unit)/2,-gauge/2])         {cylinder(r=2.3,gauge*2);}
             translate([sixinch-10+0.5,(u*unit)/2,-gauge/2]) {cylinder(r=2.3,gauge*2);}
         }  
-}    
+    }    
 }